How Do I Re-Add a Bluetooth Device to My iPhone?

The inability to connect to devices is one of the most typical issues that arise with Bluetooth.

This is particularly true when using Bluetooth.

There is a chance that the connection will be lost at times. It is possible that your iPhone will not recognize the device you are attempting to pair it with.

This can occasionally occur with devices that have already been paired.

Because of this, the Bluetooth device will need to be removed and then added again.

This article provides a comprehensive discussion on how you should proceed if you find yourself in a similar predicament.

What are the Steps to Take to Re-Add a Bluetooth Device to My iPhone?

The process of re-adding a Bluetooth device is a straightforward one. You are going to need to delete the Bluetooth accessory from your iPhone and then re-add it. You have the option of resetting your iPhone for it to reconnect to the Bluetooth device, or you can simply pair it with the device once more. No one solution is universally applicable because either one will do.

How Do You Unpair a Bluetooth Device That Has Been Previously Linked?

When you remove a Bluetooth device that has been paired with your iPhone, the iPhone will no longer automatically connect to the device.

It’s a standard procedure, especially if you aren’t planning on using the device for a significant amount of time.

At other times, you disconnect it so that someone else can establish a connection to it.

This is frequently the case, particularly if the other person is having difficulties connecting to the network.

Nevertheless, it is possible to revert the process.

The following steps need to be taken to unpair a Bluetooth device:

  1. Launch the Settings application, then head to the Bluetooth section.
  2. From that point on, you should be able to see a list of the devices that have already been paired below. Find your device and then press the “I” button that’s next to it.
  3. After that, select the option to forget about this device and then confirm your selection. This ensures that you have made the right choice, and it ought to be removed from the list of devices.

You can carry out the procedure once more for each of the devices that you want to take away.

It is possible to undo the process by resynchronizing your iPhone with the Bluetooth accessory or by reconnecting the two.

In addition to this, you have the option to temporarily disconnect the device.

How come the Bluetooth on my iPhone isn’t working?

Hardware or software that is not compatible

Bluetooth technology has a wide range of applications. Your device must have the most recent update installed at this time.

For instance, Apple has developed radios that are capable of communicating in Bluetooth version 4.0.

This indicates that it will only work with your device if it is capable of running Bluetooth 4.0.

In that case, it will not be able to establish a connection with this other device.

There is also the possibility that your hardware can support the most recent technological advancements.

It is beyond the capabilities of your operating system.

Even though the radio for Bluetooth 4.0 might be present on your device, the operating system you are currently using does not support smart Bluetooth.

It is of the utmost importance to be well-versed in the capabilities of both your hardware and your software at all times.

Incompatibility of Equipment

You are attempting to pair two devices that were not designed to work together and are therefore incompatible with each other.

Apple is notoriously known for limiting the range of its Bluetooth capabilities.

The process of connecting to other devices running on different platforms can be difficult.

In a similar vein, if your iPhone and a wireless headset are attempting to connect hands-free support profiles, then it should not be difficult for them to pair.


They are having significant distances between the two devices that are being paired.

Your iPhone and the other Bluetooth devices won’t pair if you keep them at a significant distance from one another.


The process of pairing can also be hampered by high-speed USB ports; therefore, pairing should take place in an area that is free of such ports.

When there is not enough power left in your device, the power management software tends to turn it off.

It would be to your advantage if you were also on the lookout for that.

WiFi routers are another potential source of interference.

This is because they share the same frequency spectrum.

Additionally, your iPhone will attempt to re-establish its connection to the last device to which it was connected.

You can prevent this by making sure it’s turned off.

What are the steps I need to take to repair my Bluetooth accessory to my iPhone?

After disconnecting a Bluetooth device that was paired with your device, you can easily reconnect to that device. One solution would be to proceed as if it were a new device and re-establish the connection between it and your iPhone. The next step is much easier, and it won’t take as much time as this one did. For you to accomplish this, you need to:

  1. Open the Settings application, and then head over to the Bluetooth section. If your Bluetooth is not already active, you should activate it now.
  2. Discoverability mode should be activated on your Bluetooth device if at all possible. Additionally, to be easily recognized, your iPhone needs to be discoverable. If you want to connect the accessory more easily, you should look at the instructions provided by the manufacturer of the accessory.
  3. Click the pair button as soon as the name of the device appears on the screen. Different devices may ask you to enter your PIN in different ways. This step varies depending on the component of the accessory that you are trying to pair with your iPhone.

These instructions can be used for an infinite variety of different devices.

Since the process began with forgetting your Bluetooth device, one more useful step is to attempt to “unforget” a Bluetooth device.

If you turn it around, you should end up in the same place you started.

You need to launch the settings application once more, but this time you need to navigate to the General section.

You will see several options on a list, and one of those options is going to be reset.

You should find options to reset all settings, reset network settings, and reset contact settings when you click the reset tab.

To proceed with this procedure, we will need to reset the network settings.

You will be presented with a confirmation tab where you will be asked to confirm your selection.

After confirmation, the process of resetting will begin, and it will take a few seconds to complete.

The goal of this procedure is to restore the factory settings for both your Bluetooth and your WiFi.

It will return all of the network settings to their original, factory-default state.

Reestablishing a connection to your Bluetooth device is going to be a lot less difficult.

Once the procedure is finished, you will be presented with the Apple logo for a brief period.

Once you are familiar with the home menu, the process of resetting is complete.

The loading up of all of the information that was previously forgotten is the point of the entire process.

It contains all of the devices that you failed to remember.

You can determine whether or not your Bluetooth device is operational once again.

Launch the Settings application and go to the Bluetooth section.

There will be a list of the devices that have been connected in the past, including the ones that you have forgotten to connect.

If the process does not work and you do not see your device, you need to look for other devices that are available and then reconnect them.

Because your iPhone will eventually no longer remember forgetting about this accessory, this will eventually be successful.

Because it was connected to the system before, it will have no trouble locating your device.

What Steps Can We Take to Improve Our Bluetooth Pairing Experience?

When you run into any kind of problem with your Bluetooth device, the following solutions can be helpful:

  • Always check to see that the two devices are near one another. Your iPhone and the other Bluetooth device need to be near one another for this scenario. Around five feet is the maximum distance that should exist between them.
  • During the pairing process, the Bluetooth on your iPhone should remain active at all times. Even though it should be obvious, there are times when we mistakenly believe that our Bluetooth is turned on when in fact it is not.
  • Conduct a thorough analysis of the pairing procedure used by your device. When pairing some devices, you have to enter a one-time passcode, while other devices will make a sound or play a sound to indicate that pairing is complete. This is especially true for speakers used for playing audio. You should be aware of the requirements for the pairing procedure for each of your devices.
  • During the process, you will need to have discoverable mode enabled on your iPhone. However, to simplify the pairing process, this is not applicable in all circumstances. If you were to pair it with the infotainment system of a car, for example, it would make your device visible to the vehicle. Your vehicle will look for the device and ask you for a passcode before confirming that the two devices have been paired together.
  • The power of the devices you use is another important consideration. You should be able to charge them, and you can also reset the device. You can test this by switching between the normal mode and the airplane mode. There is a possibility that your device is also utilizing intelligent power management. This means that the device will disable Bluetooth if there is insufficient power. Before beginning the process of pairing, it is essential to check that both devices have a sufficient amount of power remaining in their batteries.
  • Keeping the version of the software you’re using up to date is another potential solution. There is a possibility that there are some errors and problems that have been fixed in the most recent patch, but you do not have them. If the hardware of certain devices has not been updated, then those devices might not connect.
  • You should also check to make sure that the two devices you want to pair with each other were designed to work together in that capacity. In this scenario, your Bluetooth accessory and your iPhone need to be compatible with one another. It is not possible to connect an audio speaker to the infotainment system in a vehicle. They have to be able to get along with one another.
  • During the pairing process, you should move away from the USB 3.0 port as much as possible for the best results. This is because the port is extremely fast. It may mess up the pairing process for your device.
  • It is also recommended that you power down the device that was most recently paired with your Bluetooth system. This is because the device will automatically reconnect to the one it was paired with before each time you attempt to pair it. Because of this, the process of recognizing the new device that you are trying to pair with takes a significant amount of time.

A Few Parting Thoughts

Re-adding your Bluetooth device as an accessory can, in the end, be of great assistance.

If you are having trouble connecting to the internet while using your device, this is the situation you are in.

This article will walk you through the steps necessary to forget and then safely reconnect to your device.

If they encounter any difficulties, we also provide them with some of the standard solutions.


Six Times An Hour
Enable registration in settings - general