The Beats Flex are a fantastic set of wireless Bluetooth earbuds at a reasonable price. A pair may be purchased for close to or exactly fifty dollars.
There is a good probability that you are already familiar with this topic given that you are reading this post.
The continuous playing time for these earphones is around 12 hours.
Unfortunately, while Beats Flex earbuds have a lengthy battery life, their users may forget to charge them when the battery level drops below a certain threshold.
Because of this, there is a possibility that your Beats Flex may switch off while you are still making use of them.
Can I use Beats Flex while it’s charging?
The method by which your Beats Flex connect to your smartphone is completely distinct from the method by which they are charged. That means you may continue to use and charge your Beats Flex headphones even when they are connected to a device such as a smartphone, tablet, personal computer, or laptop.
Remember that using your earphones while they are charging may be somewhat inconvenient, so keep that in mind at all times.
Because you will be physically connected to the power source, the earphones will charge more slowly than they would if they were allowed to rest while being charged.
Before putting your Beats Flex to use, it is strongly suggested that you let them fully charge.
The primary reason I suggest doing so is for comfort, but it also has the potential to assist in maintaining the condition of your Beats Flex headphones.
The Beats Flex comes with a charging brick that provides 20 Watts of power and connects through USB-C.
This indicates that you will have a charge that is quick enough that the time it takes to get the battery to 50 percent or 100 per cent won’t be too lengthy.
Maintaining a high battery life for your earphones might also be beneficial in this regard.
Can I use Beats while they’re charging?
You may continue to use your Beats even while they are charging.
On the other hand, it may shorten the lifespan of the built-in battery and, in very unusual circumstances, it may cause your earphones to get too hot.
Portable electronics that have built-in batteries have a finite lifespan since batteries do not remain functional indefinitely.
Every battery has a maximum number of cycles determined by testing. A single full charge is depleted and then replaced throughout one battery cycle.
This indicates that one battery charge cycle has been utilised each time the battery is discharged to 10 per cent or lower and then fully recharged to 100 per cent of its capacity.
In most cases, the tiny batteries that are used in rechargeable devices have a charge cycle limit of between 300 and 500 before the battery will no longer be able to retain a charge.
The good news is that a single battery cycle may provide power for up to twelve hours by itself.
Depending on how often you wear and use your Beats Flex, they should last anywhere from four to six years before they need to be replaced. If you don’t use them very often, they should last even longer.
If you continue to use them while they are charging, the harm they do will increase.
This is because the Beats Flex has a rapid charging technology, which raises the temperature of both the battery and the receiver portion of your earphones to a significant degree.
Putting them to use while they are still being charged might cause the temperature to rise.
This heat is produced as a result of the charge being transferred into the battery, which in turn powers the earphones.
The battery may suffer harm from an excessive amount of heat, which will also cause it to lose capacity.
This heat may build-up to the point where it causes actual harm to your smartphone if you are utilising charging blocks that were not manufactured by the manufacturer of the device.
If you are charging your Beats Flex headphones and find that the area around the charging port is becoming unusually hot, you might try disconnecting them so that the headphones can cool down on their own.
Also, refrain from using them until they return to their typical temperature.
By utilising a charging brick with a reduced maximum capacity, you may prevent the brick from overheating.
These issues may be easily avoided by using charging bricks with a capacity of 20 W that is of high quality and allowing them to charge even when they are not in use.
Because of the capability of rapid charging, I don’t see this being an issue.
After just ten minutes of charging, the device has a playing duration of one and a half hours.
How long does it take to charge a Beats Flex?
Because of Apple’s innovative fast charging mechanism, keeping the Beats Flex battery charged is both simple and quick.
You will get a total of two hours and fifteen minutes of playing time out of your Beats Flex if you connect it to a 20-watt rapid charger for only ten minutes.
Even more incredible is the fact that you can obtain a full charge on your Beats Flex in little than ninety minutes.
I would think that a playback time of fewer than ninety minutes for twelve hours of content is pretty impressive.
How long does the battery on the Beats Flex last?
If you keep the volume at fifty per cent of its maximum level, the Beats Flex can play music for up to twelve hours on a single charge.
The volume at which you play your music has a direct correlation to the amount of power that it consumes.
Despite this, you should still easily be able to acquire anywhere between 9 and 10 hours of playing time at the maximum level.
To prevent harm to your ears, I suggest limiting the level of your music to between 60 and 80 per cent.
Additionally, it helps you control the life of your battery.
- Because they are powered by a lithium-ion battery, your Beats Flex have a longer expected lifespan than other headphones.
- This indicates that it can withstand anywhere from 300 to 500 cycles of being charged and discharged. To offer an accurate estimate of the number of years that the battery will last would be difficult, but I’ll give it a try:
- Light usage of your Beats Flex, which is defined as less than four hours per day, may result in fewer charge cycles being consumed and may keep your headphones operational for as long as eight years.
A lifetime of around five to six years may be expected with moderate usage, which is defined as approximately six hours of use each day and more than once every other day.
Your Beats Flex battery may need to be replaced anywhere from three to five years once it has been subjected to heavy usage, which includes virtually daily charging.
It is also essential to keep in mind that as time passes, the core of your battery will diminish, resulting in your Beats Flex being able to store less and less energy.
Because it is a natural event, there is no way to stop it from happening.
That indicates the life of the battery will become shorter and shorter over time.
Temperature extremes, the number of times the Beats Flex battery has been recharged, and the general state of the headphones may all contribute to variations in the battery’s lifetime.
If you want to get the most out of the battery life of your Beats headphones, here are a few methods that will keep them functioning for a longer period:
- Maintain your playback volume at a level that is between 50 and 70 per cent.
- When the battery’s charge drops below 10 per cent, it has to be recharged. A battery that has been completely used up might cause the capacity to decrease.
- Keep your earphones in lukewarm surroundings. The battery will be damaged if subjected to temperatures that are excessive in either direction.
- Make sure the USB-C cables and charging bricks you use are of high quality. Your earphones may get too hot if they are receiving an excessive amount of electricity.
- Turn off your earphones while they are not being used.
How do I find out how much power is left in my Beats Flex?
More information than just your voice and music is sent back and forth between the device you’re connected to and your Beats Flex headphones.
Additionally, it transmits information such as the current percentage of battery life on your smartphone.
This functionality is not always available to users.
When you are connected to an Apple device such as an iPhone, iPad, iMac, MacBook, or Apple Watch, you will be able to discover the remaining battery life of your Beats Flex Bluetooth headphones under the name of your Beats Flex Bluetooth profile in the linked devices section of the menu.
This may also work for many Android devices running Android 10 or a later version as well as Windows.
Since Beats Flex is an Apple product, the battery monitoring features on your smartphone may purposefully not operate or may display inaccurate information.
If your device does not display the remaining battery life, you may get a rough estimate from the LED indicator that is located on the right control module.
When you turn on your Beats Flex, the light that is located on the right control module will display one of these three different patterns:
- The colour white means that there is more than an hour’s worth of power remaining on the device.
- The colour red signifies that there is less than an hour’s worth of charge remaining.
- The blinking red light on your gadget indicates that it needs to be charged and is almost out of juice.
Simply keep an eye out for a red LED.
If you see that the indicator is red, put the headphones into an outlet for around 1 hour and 15 minutes to acquire a full charge.
Make every effort to prevent the battery from running out to the point where the warning light starts flashing red.
If you see this light, it indicates that the power supply for your earphones is about to run out.
When a lithium-ion battery is completely drained, the battery can lose some of its maximum storage capacity.