How to Connect Two Bluetooth Headphones Simultaneously

It is the goal of technology to make life easier, and Bluetooth technology is no exception. While attaching a Bluetooth headset to a device wirelessly was a significant feat, connecting two or more headphones at the same time is even more impressive. In this post, we’ll show you how to pair two Bluetooth headphones with two distinct devices at the same time.

How to Pair Two Bluetooth Headphones at the Same Time

By modifying device settings, employing an external Bluetooth signal emitter, and using audio mixing software, you can connect two Bluetooth headphones to any device. The processes vary depending on which device you’re using to link your headphones.

Desktop/Laptop

Connecting numerous headphones with wired headphones is simple with the help of a splitter. However, things can get a bit tough with Bluetooth headphones, but the good news is that it is possible.

An external Bluetooth signal emitter is required to connect two Bluetooth headphones at the same time. This is because your laptop or desktop’s pre-installed Bluetooth device may not be capable of connecting two headsets while maintaining decent audio quality. This is where the emitter enters the picture.

There are a variety of Bluetooth signal emitter devices on the market, which may cause you to become confused. Choose one with low latency and support for two or more headphones if you’re a wise shopper. You will be able to enjoy the higher sound quality and prevent sound delays with such a gadget.

To avoid any software issues, update your desktop or laptop Bluetooth drivers after purchasing the appropriate emitter.

By adjusting the slider on the side of your signal emitter device, you can set it to transfer mode (TX). Set the other slider to auxiliary mode (AUX) and connect the emitter to your laptop with an auxiliary wire.

Set both of your Bluetooth headphones to pair mode once that’s done. Turn on the transmitter and wait a few moments for your headphones to sync with it.

Windows 10 is the latest version of Microsoft’s operating

Windows 10 comes pre-configured to share music with numerous Bluetooth devices at the same time. This function, however, still necessitates the use of a Bluetooth transmitter or splitter. A splitter may not be necessary for PCs with multiple audio ports. In these PCs, a stereo mixer can be used.

Go to “Control Panel,” then “Sound,” then “Recording. u” to do so.” Set the “Stereo Mixer” as the default device by right-clicking on it, then tapping the “Listen” tab. Select “Listen to this Device” on this tab and then the headphones you want to use.

Volume control concerns, headphones compatibility issues, unpredictable latency, and a lack of synchronizing in the two headphones are all disadvantages of this configuration.

Unix; Linux

To allow two headphones to work at the same time, Linux and Unix operating systems, like Windows 10, require Bluetooth splitters. When purchasing the splitter, make sure that your operating system is listed as compatible. You’ll be wasting your time and money if you don’t.

Another approach for allowing two Bluetooth headphones to exchange sounds is to use audio-mixing software.

You can contact the manufacturer for more information on how to utilize a splitter or audio mixing software with your operating system. The manufacturer will provide detailed instructions on what should and should not be done.

Television

The signal emitter gadget you purchased to link your two headphones to your laptop is also useful here.

Set the device to SPDIF mode instead of auxiliary mode on televisions. By shifting the slider to the right, you can accomplish this. Connect the transmitter to your television using the SPDIF cable. You’ll be able to pair two or more headphones to enjoy your game or movie once they’re connected.

You’ll have to come up with a different solution for TVs that don’t have a SPDIF port. A Bluetooth device or any other device that does not require the SPDIF link will suffice in this scenario. This is something that certain transmitters can do.

Users can connect more than one pair of Bluetooth headphones via transmitters. Transmitters are very adaptable, working with laptops, desktop computers, and television sets. They also have a large battery capacity and come with cords that connect to the TV’s USB charger or USB port.

Connect the transmitter device to the television’s headset port after turning it on and setting it to auxiliary mode. If your television does not have a headset port, use the RCA audio output. Switch on the transmitter and pair the headphones one at a time, just like you did with the signal emitter. The pairing will be complete in around 10 seconds, letting you enjoy your shows.

iPhone

When using a wired audio splitter, Apple recently eliminated the proprietary headphone port, making it impossible to split audio between two headsets. Using two headphones at the same time has become almost difficult after this change. Users may need to download third-party programs to use two headphones at the same time.

Apple has thankfully introduced “Share Audio” to iOS 13.2., a new feature that allows users to listen to the same audio on two distinct Bluetooth devices at the same time. This feature is only available on earphones or headphones that use Apple’s H1 or W1 chip, such as AirPods or Beats headphones.

To use this function on an iPad or iPhone, go to your iPhone’s Bluetooth settings and pair both headphones one at a time. Connect one headphone at a time and play any audio. “Control Center” should now be open. Swipe down from the right corner of the screen on iPhones without the home button, and swipe up from the bottom of the screen on iPhones with the home button.

More music alternatives can be found by clicking on the music option. Select the “Share Audio” option from the drop-down menu. When you tap the Share Audio function on your iPhone, it will prompt it to share the audio with the second earphone. You may now manually adjust the volume of each of your headphones.

Mac

The Mac’s operating system is pre-configured to allow the device to connect to several headphones, both wired and wireless. Connecting two Bluetooth headphones should be no difficulty in this situation.

First and foremost, make sure your Bluetooth headphones are connected to your Mac. Run the Audio MIDI Setup program from the Utility folder once the devices have been paired. A little piano keyboard icon represents the Audio MIDI configuration, so it’s easy to find.

It should not be difficult to find. This setup aids in the creation of a Multi-Output Device, allowing the Mac to share the output with multiple headsets at the same time.

Select “Create Multi-Output Device” from the “Audio Devices” window’s bottom left “+” button, and a list of detected speakers will display in the right panel. Select “Use This Device For Sound Output” from the right-click menu of the “Multi-Output Device.” Select the sets of headphones you want to use from the Audio Device list by checking the boxes next to them.

After that, you’ll need to designate one device as the “Master” and the other as the “Slave.”

Tick the “Drift Correction” box for Bluetooth headphones to help correct lagging by keeping the two headphones in sync.

Now, open “System Preferences,” go to the “Sound Panel,” then the “Output” tab, and select “Multi-Output Device” or “Aggregate Device” from the list, and you’re done.

Android

Most smartphones, including Android, have built-in Bluetooth that allows just one device to be connected at a time. While this is a huge setback, some workarounds can allow you to use both devices at the same time.

To connect two Bluetooth headphones to an Android phone, make sure the USB Type-C port on your Android phone can output audio. You can do this by directly connecting a wired headphone to the Type-C connector or using an adaptor.

You can buy a USB-Type C Bluetooth audio adapter and get to work once you’ve established that your Type-C port can produce audio. When buying an adapter, ensure sure it permits two devices at once.

The Type-C Bluetooth Audio Transmitter Adapter must be plugged into a USB-C port. Set the adapter to Bluetooth pairing mode (for step-by-step instructions on pairing, consult your adapter’s handbook). Allow a few seconds for Bluetooth to connect before running a test to see if you can hear your music.

Set the Adapter as the default audio output device in the options menu if you can’t hear your audio. Set the adaptor to pairing mode once more. Set up the second pair of headphones in the same way. You should be able to hear your music or podcast over the two headphones after they’ve been linked.

Only the microphone on the first set of headphones will work while using two headphones. The second headphone will allow you to listen to the chat but will not provide any input.

It is possible to pair two or more headphones with the Samsung Galaxy S8. To use it, turn on Bluetooth on your phone and pair it with one headset. Your phone will prompt you to activate “Dual Audio” after the connection is established. When activated, this function allows you to use both headphones at the same time.

While this method is simple, while you are outside, the connection between the two headphones and your phone is compromised. Because there are so many distractions outside, pairing disruptions are unavoidable. I

In this instance, it’s best to keep your S8 close to your body to avoid low signal quality.

2021 Bluetooth Headphones of the Year

After examining the various methods for pairing two headphones at the same time, it’s only natural to have a look at some high-quality Bluetooth headphones, right? These are the following:

Sony WH-1000XM4 — This is one of the best noise-canceling headphones available, with excellent sound quality to match. Multipoint pairing is possible with these headphones.

Another headset with outstanding noise-canceling qualities is the Bose Noise Cancelling Headphones 700. The sound quality of these wireless headphones is bright and well-balanced.

Bowers & Wilkins PX7 Wireless Headphones — these headphones deliver best-in-class sound quality as well as increased stability and latency.

The Jabra Elite 85H headphones, with their best-in-class battery life, compete with Sony and Bose headphones. Its design exudes style and personality.

Bose QuietComfort 35 II — these high-end wireless headphones come with Google Assistant. It also boasts excellent noise cancellation and a large, high-quality soundstage. (These are the headphones that I use.)

Conclusion

While most devices do not have built-in features that allow two Bluetooth headphones to be connected, it is reassuring to learn that it is possible. There is a workaround for whichever device you want to pair your headphones with. So, whether you choose to tweak device settings or purchase a splitter, the outcome should meet your expectations.

Six Times An Hour
Logo
Enable registration in settings - general