How to Fix an Apple Watch with a Blinking Apple Logo

You’ve come here looking for a solution to the problem of an Apple watch with a blinking Apple logo. You’re not alone in this situation; numerous Apple Watch consumers have raised similar concerns.

Some users have reported seeing a flashing Apple logo when attempting to turn on their Apple Watch, which stops the gadget from loading up normally.

If you have this problem, you will notice that the Apple Watch logo begins to flash incessantly and the buttons become unresponsive. This issue could be caused by a software or hardware issue, or it could be something else entirely. An update error, for example, could cause this problem.

Fix for Apple Watch Blinking Apple Logo

There are numerous options for dealing with this circumstance, including:

1. Perform a hard reset on the Apple Watch.

Many issues, including a blinking Apple logo, can be resolved by hard resetting the Apple watch. Please bear in mind, however, that this may or may not solve the issue. To perform a hard reset on your Apple Watch, follow these steps:

  • Make sure you press down on both the side buttons and the digital crown at the same time. The Digital Crown is the rotating button on the device’s side that allows you to control it.
  • Maintain your grip on these two buttons until you see them.

When your Apple Watch has finished booting up, you’ll be prompted to enter your password (if you have one). It’s critical to have your passcode on hand before beginning the hard reset method if you’re prone to forgetting it. 

If you forget your passcode, you’ll need to delete the device using the Watch app on your iPhone and then restore it from a backup.

2. Reset the device to factory defaults.

If necessary, you may choose to reset your watch to its factory settings. This is where you delete all of your preferences and content. Your iPhone will build a new backup of your watch before erasing anything. Here’s how you do it:

  • Remove your watch from the charging station only after you’ve completed all of these steps.
  • The power off screen will appear if you press and hold the side button.
  • When you hold down the Digital Crown button, the message “Erase all content and settings” displays.
  • Then, to finish the process, follow the on-screen directions.
  • Reset your watch when you’re done. Restoring from a backup is also an option.

3. Depletion of the battery

Allowing the battery to deplete completely is all that is required for this operation. So, how can you know whether the battery is entirely dead? It’s also easy to understand. Allow the Apple Watch to sit for roughly 10 hours without being charged.

Try turning on the watch in the following step. If the Apple logo does not appear, the battery has been fully depleted. Allowing the watch to fully charge is the next step. It’ll have to be charged for the night.

4. Disconnect your Apple Watch from your iPhone.

Follow the steps below to disconnect your Apple Watch from your iPhone:

  • Keep your Apple Watch and iPhone near together while you’re unpairing them.
  • You must first open the Apple Watch app on your iPhone.
  • From the My Watch drop-down option, choose “All Watches.”
  • Click the details button next to the watch you want to unpair to unpair it.
  • Then select “Unpair Apple Watch.”
  • You have the choice of retaining or removing your cellular plan with GPS + Cellular devices.
  • If you wish to pair your Apple Watch and iPhone again, stick to your plan.
  • If you don’t want to link your Apple Watch and iPhone again, cancel your plan. You’ll need to contact your cellular operator to cancel your service if you don’t plan on pairing it with a new watch or iPhone.
  • Tap the screen a second time to confirm. To deactivate Activation Lock, you may be requested to enter your Apple ID password.

5. Check to see if your software is up to date.

Double-checking your software is a smart idea. Your Apple Watch should be running the most recent version of watchOS, as well as all of your apps. Here’s how you do it:

  • Software updates can be found under General > Software Update in the Settings menu.
  • Launch the Apple Watch app on your iPhone, go to the My Watch tab, pick General > Software Upgrade, and follow the onscreen instructions to update your Apple Watch software.

Final Thoughts

The Apple Watch blinking logo problem should be solved using these steps. If none of the previous methods work, you’ll probably need to contact Apple support.

 Most importantly, the Apple Watch flickering problem isn’t a major problem, which is a huge relief. As a result, in the vast majority of cases, these methods are effective.

Six Times An Hour
Enable registration in settings - general