How To Stop Bluetooth Pairing Requests

When you have to deal with Bluetooth pairing requests every thirty seconds, it’s a pain. When two Bluetooth devices are in close contact and Bluetooth is turned on, most Bluetooth devices will send a pairing request every few seconds. Requests can cause you to lose focus while you are working.

Below are some suggestions for avoiding inquiries.

How To Make Bluetooth Pairing Requests Go Away

Turning off Bluetooth on the requesting device or turning it off completely while not in use is the simplest way to stop the requests. However, it will be a problem if a device belonging to a neighbor or one in the office continues to send requests.

Most of the time, the device requesting to connect to your device has already done so. This isn’t always the case, since some people want to interact even if they’ve never done so before. This is what makes stopping the pairing requests so difficult. However, if you want to halt the requests, you might attempt the following options.

For Devices That Have Previously Connected

If the requesting device has previously connected to your device, it will remember the connection, which you must erase. To do so, go to Settings >> Bluetooth and look through the previously connected devices list. Click the I next to the connected device to examine connection information if the requesting device is one of the devices.

Remove or forget the device (if you have an Apple device) (if you use an Android device). Once your device forgets about the asking Bluetooth device, it is unlikely that it will send the requests again.

While this will work in most circumstances, some gadgets will continue to submit requests, forcing you to seek alternative options.

Bluetooth Settings Should Be Reset

If the device continues to submit requests, consider resetting your iOS or Android device’s Bluetooth settings.

Open Settings >> General >>Reset >> Reset Network Settings if you have an iOS device and need to reset the Bluetooth settings. This procedure will clear all Bluetooth and WiFi settings, allowing you to start over.

To make sure you don’t have any linked devices, enter your phone’s passcode and confirm it. The requesting device will be erased from your phone’s memory, which may result in the connection being lost.

Open Settings >> System >> Reset Options if you’re using an Android device. The reset options tab will show you many reset alternatives. Choose Reset WiFi, Mobile, and Bluetooth from the drop-down menu and follow the on-screen instructions.

The reset process will begin after you enter your device’s password. You never have to wait because the process is instantaneous. Following that, your device will erase all prior connections, and you will need to fix any devices you previously associated with.

Change the name of your Bluetooth device

This option is especially useful if the requesting device has already connected to your Bluetooth device and is currently issuing the request again. If you rename the device, the requesting device may not recognize the new name, and requests may be halted.

Some devices, however, will continue to transmit requests even after you rename your Bluetooth.

Connect the requesting device to another device.

This is one of the most effective treatments for those who have encountered this issue. Again, it is not compatible with all devices, as certain requests may begin subsequently.

If the friend does not work in the same workplace or live with you, you merely need to connect the requesting device to his or her device. The asking device will remember the friend’s device as the “last device they connected to” once they depart the premises. The issue will now be with the new device to which you’ve connected.

If the problem reappears once the other device is removed from the premises, you should try one of the other remedies listed above.

Users who have access to the device that is being requested

It’s simple to stop the requests if you have access to the requesting device. To forget your gadget, you can either turn it off or reset it. You can turn off keyboards, mice, and speakers that aren’t in use, and the problem will be rectified.

If you want the devices to stay on, you’ll have to reset them to forget about the Bluetooth device they keep asking for. You must reset speakers, headphones, earbuds, and other Bluetooth devices according to the user’s instructions.

Most speakers and headphones require a few seconds of pressing the connecting button to reset the speaker. Once the speaker or asking device has been reset, it will never ask to link with another device unless they are already paired.

If the asking device is a smartphone or a computer, you must “Forget” or “Remove” the requesting device from the requesting device’s Bluetooth settings.

What if you don’t have access to the requesting device, and it has never been connected to yours?

The requests appear to be caused by a Bluetooth problem that has yet to be resolved. While the methods listed above may help in some cases, a factory reset may be necessary for others.

In this instance, your only alternative is to ask your neighbor to turn off the gadget that is always asking for pairing. You are safe if your neighbor can forget or remove your device. If the requests occur at your place of business, you can track down the equipment that is sending them and turn it off to ensure the problem does not recur.

You can make your device unfindable after connecting to the devices you wish if you’re using an older version of Android or iOS. Turn on Bluetooth, connect to the devices you want to connect to, and then disable Bluetooth discoverability. The asking device will no longer be able to “see” your device, and the requests will stop.

All-new gadgets, on the other hand, are always discoverable, and there is nothing you can do to hide your Bluetooth connection. You can avoid the requests by turning off your Bluetooth connection when not in use.

Do you think you should accept the requests?

Whether you know which device is delivering the requests and you’re sure it’s not a hacker, you can couple with it and then remove it to see if the problem goes away. If you’re unsure where the signal is coming from, don’t accept the pairing request because it could be from a hacker.

Closing Thoughts

If the problem persists after attempting all of the following remedies, you must file a bug report. Check with your device’s operating system supplier for instructions on how to report a bug and how to do so. There have been a lot of people who have had this problem, and not everyone has been able to remedy it using the options listed above.

However, after you report a bug, your operating system provider or device maker will assist you in resolving the problem. However, in the vast majority of circumstances, one of the techniques listed above will assist you in stopping the requests. Although getting a “Block Signal” button may take some time, the options above should keep the signal off.

Six Times An Hour
Enable registration in settings - general