When you think about JBL, you probably think of high-quality speakers and other audio equipment that they produce and distribute. JBL has been recognised for developing top-of-the-line robust, sturdy speakers with high-quality sound and features for decades. JBL is regarded as one of the top speaker manufacturers. JBL Charge, Clip, Flip, Go, Xtreme, and Boombox are just a few of their speakers.
Speakers, on the other hand, are susceptible to damage because they are electronic devices. They, like any other technological item, will need to be repaired at some point. You might be wondering if JBL speakers are repairable. We’ll learn more about how to mend JBL speakers in this post.
Is it possible to repair JBL speakers?
JBL speakers may be repaired. However, you should first check to see if your speaker is still under warranty. If so, you can submit a warranty request to have JBL repair or replace your broken speaker. When you have a problem with your speaker, it is advised that you send a case request to JBL support, and the customer care staff will assist you in resolving the issue.
JBL Speakers Repair
JBL has produced some of the greatest speakers on the market in the previous three decades. Speakers like the JBL Boombox 2 are among the most costly JBL speakers ever manufactured, and they deliver unrivaled sound quality when compared to other JBL speaker models. These speakers have been used in recording studios to mix master recordings, when sound quality is extremely important.
Repairing any JBL speaker type is not only simple, but it is also advised because the repairs are inexpensive and restore your speaker. Because JBL speakers are built to last, a simple repair will guarantee that your speaker is operating at its best and providing high-quality sound.
However, expert repair and maintenance are required. If you decide to fix it yourself, please be sure to follow the instructions to avoid further harm to your speaker. Because the speakers are meant to be portable, the circuitry may include minute details that might be destroyed if not handled properly. The woofer is the most usually repaired component of an existing speaker in JBL audio equipment.
The steps for repairing a JBL speaker are as follows:
- 1. Remove the speaker grill with care: The grill is frequently held in place by plastic pins attached to the grill itself, depending on the type of the speaker. Remove the grill from both sides and the top slowly to prevent damaging the plastic buckles.
- 2. Examine the cabinet’s loudspeakers: Woofer problems can be spotted as dried-out foam or rears in the cone and can be heard as a distinct lack of bass. The overall sound will be muted due to tweeter difficulties.
- 3. Remove the defective speaker component from the cabinet, depending on the degree of the damage. Using an approved screwdriver, remove the screws. Working parts from authorized dealers should be used to replace the broken components. Only purchase replacement components from JBL service locations to assure system compatibility. It is critical to utilize original equipment manufacturer (OEM) replacement components. Check the speaker’s other wiring details if necessary to make sure there are no obvious wiring concerns.
- 4. After that, clean the previous form’s speaker cone and speaker basket. Cleaning the basket using the point of a flat screwdriver is possible, but the cone must be handled with care to prevent ripping or puncturing it.
- 5. Glue the cone’s around first, then the basket. Foam replacement kits usually come with adhesive. Foam replacement kits are reasonably priced. You may purchase them from any electrical store or a JBL service center.
- 6. Check the component number inscribed on the back of the magnet for any dead or blown mid-range or tweeters in the cabinet. Replacement components are available from authorized JBL dealers and service centers. Make sure you have the component number before you go parts shopping. Every model, no matter how similar in appearance, will have its own set of pieces. Some parts will not fit in others, and even if they do, you may run into voltage mismatches or capacitance problems.
- 7. Carefully reassemble the speaker before putting it into the power source when done. If the problem persists, see a professional or a JBL approved service center for assistance.
Common JBL Speaker Problems and How to Solve Them
Troubleshooting and repairing a JBL speaker is an important step in extending the life of your speaker. Before you begin fixing your speaker, it’s necessary to understand the most frequent issues that might arise and how to resolve them.
Here are some of the most frequent JBL speaker diagnosis issues and how to remedy them:
- The battery on a Bluetooth speaker fails to charge — this is a regular issue. It happens when the battery refuses to charge even when hooked into a wall socket. This might be due to a faulty battery or improper charging.
a defective charging port, or a bad cable Over time, batteries degrade. The battery may be dead if the power LED does not light and the speaker does not emit sound. By opening your speaker, you may replace the battery. Wear can also cause the power cord to fail. Before attempting to fix your speaker, test whether it can be charged with a new cord. It’s possible that it’s just due to a faulty charging port. You’ll need to unscrew your speaker and replace the charging port to repair this.
- Bluetooth Connection is not working –
This is a common issue with Bluetooth speakers. It happens when your speaker is unable to link with other Bluetooth devices. This is usually caused by having too many devices connected, or by malfunctioning Bluetooth receivers, or by the device needing to be reset. Before you disassemble your speaker to solve this, make sure all surrounding devices are unpaired. If that doesn’t work, restart the device to force it to unpair. It’s possible that it’s due to a defective Bluetooth receiver. Disassemble your device and replace the Bluetooth receiver to fix this.
- Audio issues –
It might be speaker vibrations, sporadic sound, or something completely unrelated to sound. When the battery can’t retain enough charge owing to missing screws, broken speaker cables, or damaged speakers, this happens. To repair the speaker, dismantle it and inspect it for loose cords, debris, or physical damage.
- Faulty Speaker buttons –
This happens when you push a button and nothing happens. It’s possible that the button is stuck. It can also be caused by dust and dirt accumulating in the speaker. To fix the gadget, switch it off and push the button repeatedly to try to unstick it. If this doesn’t work, dismantle the gadget and examine the rubber membrane for wear, as well as leaks. Clean or replace the buttons that are damaged.
Frequently Asked Questions
1. What should I do if the charging port on my JBL speaker stops working?
If your charging port is broken and your gadget is still under warranty, consider taking it to a JBL service facility for repair. If you don’t have the abilities or an original replacement port, don’t try to fix it.
The charging connector is extremely sensitive, and if handled incorrectly, it might harm the speaker’s internal circuit even more.
2. How can I get my JBL speaker fixed while it is still under warranty?
If it’s still under warranty, return it to the store where you got it. Alternatively, go to the nearest JBL service facility. JBL offers a one-year warranty for your speaker (five years for any non-powered speakers).
This is based on the original end-user purchaser’s purchase date. To do so, go to the JBL warranty support page and fill out the order form. A readable copy of your original purchase receipt or invoice, mailing address, and product serial number will be forwarded to you through email.
Within 24-48 hours of receiving this, a customer service representative will contact you with more information.
JBL takes pleasure in creating and manufacturing high-quality, long-lasting speakers. The JBL speaker will seldom let you down.
kers. However, if something goes wrong with the speaker during regular usage, JBL will repair it as long as it’s still under warranty.
JBL speakers, even if they don’t come with a guarantee, may be readily fixed and returned to working order. It is critical to locate a JBL service facility that is approved in your area.
Alternatively, you can return the speaker to the store where you purchased it for repair. If this is not possible, JBL offers a downloaded form for servicing and repair on their website. For more information, see the JBL warranty website.
To avoid inflicting extra harm to the speaker, read the instructions before disassembling any JBL speaker. For expert guidance, troubleshooting, and maintenance, contact a professional or JBL support service.