How Do I Stop My JBL Speaker From Turning Off?

JBL is one of the oldest audio system manufacturers. They produce excellent speakers at an affordable price. It is only in rare instances that your speaker may have troubles, and even then, you can easily resolve the concerns.

A JBL speaker is a great choice if you need a speaker with deep bass but still want to take it on your next adventure. When you’re listening to music, your speaker may constantly go off due to hardware or software difficulties. What should you do if this happens?

What is the best way to keep my JBL speaker from turning off?

Resetting a speaker that keeps going off while you’re listening to music is the simplest solution. Hold the volume up and play/pause buttons simultaneously, or the volume up and Bluetooth button, mute button, or volume down and Bluetooth buttons simultaneously for around five seconds to reset the speaker.

If your speakers continually turn off, try resetting them to see if it fixes the problem and allows you to enjoy your music more. Before you reset the speaker, double-check that the battery is fully charged.

How to Reset a Speaker That Is Constantly Turning Off

If turning on your JBL speaker doesn’t cure the problem, you can go ahead and reset the speaker to factory settings. This will clear all of the data from the speaker, restoring it to its original condition.

Resetting the speaker, on the other hand, is not always a smart idea because the speaker may fail to pair with the devices it had previously linked with after the reset.

If the speaker continually turns off despite a good battery connection, it’s most likely a glitch that may be fixed with a simple reset. Problems with your speaker’s software might be resolved by resetting it. Because each speaker has its own set of settings, you’ll need to know how to reset each one.

To return your speaker to factory settings, follow the steps below:

  • JBL Charge: When the speaker is turned on, press and hold the Volume Up (+) and Bluetooth buttons at the same time for a few seconds. The light around the buttons will turn on, but the speaker will remain turned on. After the procedure, you must turn it off.
  • JBL Clip: Press and hold the power and play/pause buttons at the same time for around 30 seconds while the speaker is on. After the reset, the gadget should turn off.
  • JBL Link: For roughly 15 seconds, press and hold the mute button. The gadget will be turned off and the reset completed.
  • JBL Go: For around five seconds, press and hold the Volume Down (-) and Bluetooth keys simultaneously. The gadget will power down after a reset.
  • JBL Flip: With your speaker turned on, simultaneously press and hold the Volume Up (+) and Play buttons for a few seconds until the device turns off.
  • JBL Xtreme: For around five seconds, press and hold the Volume Up (+) and Play keys at the same time. After the reset, the gadget will turn off.

After the reset, turn on the speaker to verify that the reset was successful. Connect a device to the speaker that you’ve always used to test if it contains the device’s memory. If the speaker prompts you to pair it again, the reset was successful.

What may be causing your JBL speaker to not turn on?

If your speaker continues turning off, you may find it difficult to turn it back on. If this occurs, the first thing you should do is make sure your speaker is charged. If you plug in the speaker and turn it on, the problem should go away.

Most JBL Bluetooth speakers feature rechargeable batteries that last up to 24 hours. As a result, consumers frequently forget to charge their gadgets. If the speaker still won’t come on, the issue might be a malfunctioning charging cord that causes the battery to discharge too quickly. If you suspect a problem with your battery cable, try an alternative battery cable to see how it performs.

Your speaker’s battery or circuit board may be damaged from time to time. If the battery is damaged, it will not maintain a charge for long enough and will turn off. It is simple to obtain a new battery for some JBL models, while it is difficult to obtain a replacement battery for others.

If you’ve never fixed a Bluetooth speaker before, you’ll need to take it to a professional to get the battery replaced. If you open your speaker and don’t know what to do with it, you might do extra harm.

If you do not connect your JBL speakers to any device for more than 10 minutes, they will switch off automatically. This is done to save energy on these gadgets. If your gadget turns off after ten minutes or so, simply turn it back on and connect it to a device to resume listening to music.

What causes a JBL speaker to turn on and off repeatedly?

Although most speakers will just switch off, others will turn off and then turn back on again, sometimes for an extended period. This will have an impact on how you listen to music. No function permits these speakers to switch on automatically.

Most likely, the power button has an issue, such as dust under it, or the speaker’s circuit board has a problem. Whether you have this problem with your speaker, you can contact JBL to see if the warranty covers it.

You may either take the speaker to a professional to have the dirt under the power button cleaned out, or you can let the warranty cover the cost of replacing or repairing the speaker.

Is it Possible for an Old Speaker to Keep Turning Off?

If your JBL speaker is old, it may have a slew of problems that a simple reset won’t fix. These speakers may have a malfunctioning circuit board that causes them to turn on and off continuously. Again, the speaker’s battery might be damaged to the point where it won’t retain a charge.

If resetting and replacing the battery doesn’t cure the problem with an old speaker that is no longer covered by the warranty, you may need to replace the speaker. The majority of JBL speakers are reasonably priced, and replacing a speaker may be an excellent way to save the costs of repairing an outdated system.

Bluetooth connectivity may also be an issue with these speakers, especially if they are using an earlier version of Bluetooth. When should you replace your speaker?

Why should you invest in a new speaker?

The most recent JBL speakers offer more advanced functions. To begin with, they feature Bluetooth version 4.2 or higher, which makes them safe and enables them to connect quickly and over a long distance. When it comes to transporting the speakers to the next excursion, they are also sleeker and simpler to carry.

You will get greater audio quality if you choose a newer speaker. This is due to a more advanced Bluetooth version and a more powerful subwoofer in the speaker. You also have a variety of options to pick from, and there is a speaker to fit any budget.

Do JBL Speakers Have Bluetooth Connectivity Issues?

Bluetooth connection may be an issue with all Bluetooth speakers. In the vast majority of situations, they will not pair or will lose connection after pairing. Connectivity troubles with JBL speakers are uncommon unless the speaker is very old, although they can occur.

If your speaker does not connect, try turning off both the speaker and the phone and waiting three seconds. To the couple, the devices, turn on the phone and the speaker and go to the Bluetooth settings on your phone.

If the connection problem persists, make sure there are no obstructions, interference, or that the two devices are close enough to connect.

Closing Thoughts

If you need assistance with a speaker issue, you can always contact JBL customer service. JBL speakers are reliable, and I know this since I’ve tested them. The firm makes some of the most popular professional equipment, and their consumer items are of the same high quality.

Whether your speaker’s warranty is still valid, you should contact the manufacturer to determine if the equipment may be fixed or replaced. This will save you the trouble of having to open the speaker yourself, which might result in extra problems.

Always start with the simplest solutions, such as turning the speaker off and on. If none of these easy repairs work, you can return the speaker to its factory settings. The major issue here is that your speaker may no longer connect to devices that it previously did.

Six Times An Hour
Enable registration in settings - general