The status of most peripheral devices on the market is displayed via a screen display or an LED light indicator.
An LED light status indication is found on all Sonos speakers and soundbars.
The light hue and rhythm are combined to inform the owner of the device’s current state. What do all these flashing lights indicate, though?
What Do the Sonos Lights Mean When They Move?
The LED light indicator on your Sonos Move is intended to keep you updated on the status of your device. Solid, flashing, or alternating White, Green, Orange, Red, and Blue Sonos Move LEDs are available. Every combination has its significance. If the LED light is solid white, for example, the device is turned on and working properly.
Here are the meanings of each hue and rhythm pattern:
- Solid White Light – The speaker is turned on and operational.
- There is no light because the speaker is not turned on.
- Flashing White Light – The speaker is powering up after being plugged in.
- Solid Green Light – The speaker is muted or turned off.
- Green Light Flashing – Speaker is turned on and ready to use.
- Solid Orange Light – Speaker is in danger of overheating and is in warning mode. Remove the device from the wall outlet and unplug it.
- Speaker has failed to commence playback, resulting in flashing orange light.
- Speaker is faulty if it alternates between orange and white light. It’s possible that the device has to be upgraded or reset to factory defaults.
- The speaker has turned on, but it was unable to connect to the Sonos Controller App within the first thirty minutes.
- Speaker has not been linked to a Sonos account. Alternating Green and White Light – Speaker have not been linked to a Sonos account.
- Speaker has failed to partition correctly during the update, resulting in alternating red and white light. Restart your computer and give it another shot.
- Speaker is connected to a Bluetooth device via a solid blue light.
On the Sonos Move, that’s all the lights there are.
Each light, for the most part, also includes a message about how to react.
However, after finishing an update or resetting the speaker to factory settings, the yellow indicator may reappear. In some circumstances, you may need to contact a Sonos customer service representative for help with either the software or acquiring a replacement speaker.
These problems are unlikely to arise, so check the LED now and again to keep an eye on your Sonos speakers.
All of Sonos’ gadgets have the same color and rhythm scheme.
This means that understanding the meaning of the LED light on the Sonos Move will also help you understand how to read the light status on the Play: One, Play:5, Beam, Playbar, Playbase, Sub, Port, Amp, and Boost are all included.
The play and pause buttons are constantly extremely close to the LED light.
Fortunately, as the lone light, it’s very easy to spot.
On the Sonos Move, the LED is located just over the play/pause button.
What is the purpose of the blinking light code?
The normal individual will not be able to comprehend the code underneath the hood.
To indicate diverse messages, the industry norm is to utilize an LED light with either shifting colors or rhythms.
Each of Sonos’ speakers has the same light color and rhythm coding.
The LED may change colors up to five times. It also either flashes or does not flash at all.
A variety of circuit boards and tiny transmitters are used in a lot of modern technology.
While they are durable and frequently work as expected, there is a lot that can go wrong with them.
The majority of the time, these issues cannot be diagnosed by physically inspecting the internal components.
You’d have to find a means to connect the speaker to a computer to read the device’s internal processes if it didn’t have a warning system.
The light will be solid white or solid blue if your Move is working properly.
Any other color could suggest a problem that has to be addressed.
Your Sonos is trying to notify you about a defect or potential risk if you see green, yellow, or red.
Any issue indicated by the yellow light should be investigated right away.
How to Turn Off the Light
You might not want to see the light indicator at all in some instances.
The bright white LED can be distracting and harmful to your eyes if you’re lying down at night listening to music.
Did you know that Sonos built a means to turn it off into the system?
You’ll need to install the Sonos Controller app on your mobile device to put your Sonos Move into “no light” stealth mode.
You should already have this app installed and ready to use because it is essential for setting up and using Sonos speakers.
To get started, open the app. The screen in the room will greet you.
There is a sandwich icon on the upper left that opens the navigation bar.
It should be tapped.
A menu will display on the left side of the screen.
A gear wheel symbol titled “Settings” can be found near the bottom. Select the Settings icon from the drop-down menu.
Now select “Room Settings” from the drop-down menu.
If you have numerous Sonos speakers, make sure you’ve picked the “room” that governs the speaker you wish to control in the app.
For example, if you build a “Mobile” room for your Move, it should say “Mobile” next to the Room Name listing.
If the correct room is selected, toggle the “White Indicator Light” option.
The LED light should be turned off at this point.
In full darkness, you may enjoy the magnificent music of your Sonos Move.
This option will not automatically be turned back on.
If you want the LED to turn on again, go back to the room settings in the Sonos Controller app and turn on the “White Indicator Light” option.
Keep in mind that these modifications will affect every speaker in the controller app’s “room.”
If you move your Move from room to room and have other Sonos speakers, you might want to set up a separate area to manage the Move.
On a Sonos Move, What Do Blinking Lights Mean?
There are a lot of various light combinations for the Sonos series, but once you grasp them, it’s very simple.
If you’ve misplaced the papers that came with your Sonos Move, I’d recommend downloading a manual from the company’s website or making a brief note of the light meanings for future reference.
While the information is still fresh in your mind, you are unlikely to encounter any problems.
After all, trouble seems to appear when you least expect it.
The majority of the time, your speaker will only emit white or blue colors, with a few exceptions of red and green.
Just keep in mind that blue implies the same thing on most devices: the “blue” tooth is active.
White denotes that something is turned on and working.
If you notice any other hue, you should double-check your Sonos Move.
Most Commonly Asked Questions
What does the Sonos Move’s blue light mean?
If the Sonos Move’s LED light is solid blue, the speaker is connected to a Bluetooth device.
If your Sonos Move is not connected to the speaker, you may need to turn on Bluetooth pairing mode to prevent unwanted pairings.
The light on my Sonos Move alternates between green and white. Is there something wrong with my speaker?
Your Sonos speaker is in perfect working order. The alternating green and white light indicate that you have not yet connected your speaker to a Sonos account.
Having a Sonos account comes with a slew of advantages. You should use the Sonos Controller app to correct this.
My Sonos Move is synced with my phone and playing music, however, the light is not turning on. What’s the matter?
If the LED light does not illuminate and the speaker is connected and operational, you may need to turn off the indicator light in the Sonos Controller app at some point. To access the light indication toggle option, follow the guidelines in the section above under “How to Turn the Light Off.”
Simply tap it once you’ve arrived, and the light should turn back on. The LED bulb may have been damaged if restoring this option does not turn the LED indicator back on.
It’s not a bad idea to use your warranty if you have one.