iPads are fantastic devices for performing activities such as binge-watching your favourite television show, reading a good book, engaging in fun games, and even getting some work done.
iPads are only frustrating when they won’t turn on, no matter how many times you press the button on the side of the device. Other than that, they’re a lot of fun.
It just won’t budge.
However, there is no need for you to be concerned because I have a few options that can be of assistance to you in this situation.
What gives with my iPad not turning on?
It’s possible that your iPad won’t turn on because the battery is dead, the software is damaged, or the screen is broken. You can try to fix the problem by charging the battery, performing a hard reset, ensuring that your charger is working properly, contacting Apple Support, or scheduling an appointment to have your iPad checked out if none of these solutions work.
In the event that you aren’t entirely certain how to put these solutions into action, you’ll find some useful information down below.
The Reasons Why Your iPad Won’t Activate
If you don’t know the first thing about technology, you’re probably going to have a hard time figuring out why your iPad is so slow to turn on when you try to use it.
It’s possible that the problem is being caused by one of many common issues.
Here are some examples:
1. A Battery That Is Dead
A dead battery is the most likely culprit when an iPad won’t turn on for some reason. People have a tendency to ignore this fact. However, there is some good news regarding this issue, and that is the fact that it can be easily fixed by simply charging it.
Find the charger for your iPad and make sure it’s plugged in.
Please allow it a few minutes to begin operating normally again. If you’ve tried everything and it still won’t turn on, you might have a more serious problem that needs a little more attention.
2. Malfunctioning Software
There could be a problem with either the software or the hardware on your iPad if it is acting obstinately. The fix for this problem isn’t as simple as replacing a dead battery, but we have a few suggestions that should get you back to using your iPad in no time.
There is also the possibility that a manufacturing defect is to blame for it losing all of its vitality.
It’s possible that the software on your iPad is damaged if it hasn’t turned on even after you’ve plugged in the charger and given it some time to charge.
It is possible that you will require the assistance of a professional.
3. Damaged or Frozen Screen
There are some iPads that are not waterproof.
If you were lounging by the pool and accidentally dropped your iPad into the water, this could be a good explanation for why it won’t turn back on.
It is possible to damage the whole thing or the screen if you drop it on the floor.
In most cases, the image that was being displayed will either remain frozen in place or turn completely black.
How to Proceed
There is still a glimmer of hope! If you’re having issues, I have some solutions that should help you feel less frustrated and get your iPad back to functioning normally again. Please let me know if this is the case.
1. Give the Battery a Charge.
I am well aware that this may seem like stating the obvious, but there are those who forget to charge their electronic devices!
Get your device ready, then grab its cable and plug it in.
Because it might take some time for it to start working again, you should make sure that it stays plugged in for a few minutes after you turn it back on.
In the event that the issue was a dead battery, it ought to turn back on within ten to fifteen minutes.
Be patient, as it may take up to an hour for it to turn back on after being charged; in these instances, you will need to wait for it.
If charging the battery does not cause the device to turn back on, try some of the other solutions listed here.
2. Carry out a factory reset
If trying to charge your iPad wasn’t successful at all, there is another option available to you: you can perform a hard reset.
Apple recommends users perform this action in the event that the screen is frozen or black.
If your iPad does not have a home button, then the process of performing a hard reset will be slightly different.
iPads that have a home button of their own:
- Find the button labelled “home” and the top button.
- While holding down both buttons simultaneously, wait for the Apple logo to appear.
That shouldn’t be too difficult.
On the other hand, if you do not have a home button on your iPad, you will be pressing a different set of buttons.
- To adjust the top volume, press and then let go of the button.
- The bottom volume button should be pressed and released.
- To turn the device on, you must first press and hold the power button for some time.
If performing a factory reset does not solve the problem, I have a few additional options that you can try.
3. Make Sure That Your iPad Charger Is Working
If you had your iPad plugged in all night long but it still won’t turn on in the morning, there may be a problem with the charger.
If you want to determine whether or not the problem is caused by your iPad charger, you can try plugging it into your iPad and observing whether or not it charges at all.
If it doesn’t, you already know that it’s possible there will be a problem with it.
Go to the store in your area and pick up a replacement charger.
A new charger should be able to turn on your iPad, but if it doesn’t, you may need to try something else. If the old charger doesn’t work, try buying a new one.
4. Reach out to Apple’s customer service.
If nothing else you’ve tried has been successful, turning the situation over to experts might be the best course of action to take next.
There may be a more fundamental problem with your iPad, such as a software or hardware glitch, which prevents it from turning on.
You can get in touch with Apple by sending them an email, chatting with them online, or calling them.
They ought to be able to guide you through troubleshooting your iPad or provide you with the subsequent steps that you need to take.
5. Consult an Expert
If getting help from Apple Support doesn’t seem to be solving your problem, you might want to try your luck at one of the local Apple stores or a tech repair shop.
Taking your device to a qualified technician gives them the opportunity to examine it closely and make any necessary adjustments to it in person.
And even though it might cost you some money, you won’t have to wait long before you can get back to watching your favourite movies or playing games.
The Nutshell To summarise,
iPads are capable of causing vexing issues while also being a source of endless entertainment. If they are functioning as they should, then you are getting good value for your money.
If, on the other hand, all you see is a black screen with no indication of what’s happening, the experience is not nearly as enjoyable.
You are in luck because there are a few simple solutions that can be of assistance to you.
First, you should attempt to charge it, and if that doesn’t work, you should either check the charger itself or perform a hard reset.
If neither of those things works, then you most likely have a problem with the hardware, which is something that a trained professional should look into for you.
Make an appointment, or call the Apple support line and speak to someone there.