Why Is My PS4 Controller Flashing Blue And Not Connecting?

I hate it when I want to unwind by playing some fun video games, but the hardware is acting up.

Some people are finding that their PS4 wireless controllers flash blue but don’t connect to the console.

Let’s take a look at this and figure out what’s wrong so you can get back to gaming.

Why does the light on my PS4 controller flash blue and it won’t connect?

Your PS4 could be flashing blue and not connecting for several reasons, but it’s easier to fix the problem than to figure out what went wrong. Startup your PS4 controller and then your system. If this doesn’t work, try putting your console back to its original settings or looking at the hard drive.

You should also check the PS4’s power cable since a broken cable could stop controllers from connecting.

Sometimes this is an easy problem to solve, and sometimes it’s a hard one.

Read on to find out how to fix the problem and get back to gaming.

Easiest Fixes

If the blue light on your PS4 controller is blinking, it’s trying to connect to your console.

Most of the time, this only takes a few seconds before it works.

The problem is that sometimes you have to wait for seconds, then minutes, to figure out that it’s not working.

I’ll point out the easiest things to fix here.

All of these require changes to the controller itself.

I think you should try these steps first because it’s likely that this will solve the problem.

Start the PS4 Controller up again.

How do you repair the blue light on the PS4 controller if it’s blinking? It is quite probable that restarting the controller would rectify the situation.

In addition to this, doing things this way is the simplest solution to the issue.

First things first, check to see whether the controller needs to be charged. If the battery is running low, then you should charge it for around half an hour.

Even though there is still a chance that it will function even if the battery is low, it is recommended that the controller be completely charged. In addition to this, when the controller’s battery is low, it might be difficult to establish a connection with the console.

Find the button that says PlayStation.

The PlayStation logo can be found on this button, which can be found in the middle of the analog sticks.

Maintain the press and hold for about ten seconds. It is necessary to power down the controller.

Activate the controller by turning it on. This will cause the controller to restart, and in the vast majority of instances, it should cure the issue.

Sharing Mode for Bluetooth

It’s simple to forget to put the controller to the Bluetooth sharing mode, which is a common mistake.

If the connection between the controller and the console has been lost, then you will likely need to perform this to re-establish the connection.

You may need to do this if this is your first time matching the two up.

Simply press and hold the PlayStation button while simultaneously pressing the Sharing button for about five seconds.

This enables a connection to be made between the controller and a PlayStation 4 or any other compatible device.

You’ll need to choose the controller from the PS4 before it can connect.

Reset the controller for the PS4

The next step in troubleshooting is restarting the controller for the PS4.

This is analogous to turning the controller off and on again in practice.

The primary distinction lies in the fact that resetting the controller will return it to its factory settings.

You will need something long and thin, such as a toothpick, bobby pin, paperclip, or any similar item.

If you turn the controller for the PS4 over, you will discover that there is a little hole in the back.

This is situated just to the left of the top edge.

After you have inserted the item, you should be able to feel a button being pressed.

If you keep your finger on the button for around three seconds, you should hear two beeps.

Take the thing out of the room. This should also cause the controller to power off.

Try reconnecting after you have turned the controller back on.

Keep in mind that insufficient power from the controller’s battery may also prohibit connections from being made, so charge it up first before doing this.

Check Power Cables for the Console

Another simple solution, this one is also the only one that requires the console to be physically moved.

There might be an issue with the power cord of the console at any given moment.

Although you may believe that this would prevent the console from turning on, in certain instances, this is not the case.

There are occasions when it just causes the electricity to become unstable or inhibits controllers from connecting.

Check that the power cord has been completely placed into the console before continuing.

Examine the cable itself to see whether or not any of its components are damaged or worn.

If this is the case, you may want to consider purchasing a new power cord.

Steps for Advanced Troubleshooting

These next stages are a bit more challenging, and it is highly recommended that you get expert assistance.

I will go through the advanced troubleshooting procedures to help you repair a PS4 controller that is flashing, but I strongly advise you not to open the console or do anything else too radical without first getting some further assistance.

Incorrect execution of any of these procedures may result in the loss of your data or the occurrence of other issues.

Because of this, my recommendation is to include a person who fixes things.

There is no way around working on the console itself for any of these tasks.

Remember that the blue flashing light on the PS4 controller only indicates when the controller is unable to connect to a device. It’s tempting to believe that the issue is with the controller itself since the light is flickering blue.

A connection may not be possible if the device in question is not functioning properly.

Check the hard drive of the PS4

If the hard drive of the PlayStation 4 is not connected correctly, it may prevent the controllers from connecting, in addition to causing a variety of other issues.

When this occurs, it is almost often after the hard drive has been replaced or after the console has been purchased with an improved hard disc.

Put the PS4 into standby mode and unplug the power line.

Take off the lid of the hard drive. This is attached to the side of the PS4, and it often comes off quite easily.

The hard disc will now be accessible to the public.

If at all possible, protect it from being exposed to dust and other types of particles.

There are screws visible that are securing the hard disc in place.

Check to see if there is any play in the screws. If that is the case, use a screwdriver to further secure them.

You don’t want to give them a fit that’s too snug. Simply check that they are sufficiently snug to hold the hard disc in its proper position.

Replace the cover, power up the PlayStation 4, and check to see if the issue persists after doing so.

Safe Mode

Because there are repercussions that come with this remedy, you should save this option until last.

Before even trying this stage of troubleshooting, it is strongly recommended that you create a backup of all of your data.

The deletion of any data that has not been stored in the cloud.

Spend a short amount of time copying the information on your internal hard disc to an external device.

On occasion, the PS4 can have software difficulties that will prohibit controllers from being able to connect.

In a manner comparable to that of the part about the hard drive, this often results in additional issues as well, all of which you are probably observing.

Put the PS4 into standby mode. Keep holding the power button until the safe mode menu appears on the PS4’s screen. This will be validated by a beep from the console.

After that, hit the PlayStation button when you have a wired controller connected.

This will open a new menu in a new window.

You will either see “rebuild database” or “restore default settings” depending on the version of the PS4 that you have. Both of them accomplish the same goal.

The console will need some time to restore the settings to their original factory defaults.

This should fix the problem if the controller was connected successfully before you made this change.

Before taking such extreme action, double-check that you have all you need to succeed.

Six Times An Hour
Enable registration in settings - general