Why Are Powerbeats Pro So Quiet? [Fixed!]

You prepare to insert your brand new Powerbeats Pro headphones into your ears and press the play button, but the music is hardly audible.

Therefore, you do what any sane person would do in this situation and turn the volume up.

It’s possible that you accidentally touched the button that lowers the volume; accidents like this do happen.

However, increasing the volume doesn’t seem to help much.

You try increasing or decreasing the volume on your smartphone, but nothing happens.

These blasted things are simply much too quiet for your taste, is that what you’re saying?

What is it that you ought to do? Is it worth it to retain them if all they’re going to do is sit around and do nothing? The Powerbeats Pro can have its volume increased by adjusting the sound settings on its own, which is some welcome news.

Why does Powerbeats Pro make so little noise?

Your Powerbeats Pro may be having trouble pairing or are encountering interference with the audio device you’re using. There is also the potential that the sound is so muffled because the volume on your audio device is set so low. A buildup of earwax and faulty wires are two more possible causes of the loudness issue that you are experiencing.

The Powerbeats Pro has a volume limitation, and the vast majority of the time when they get silent it is because the limiter has been activated.

In certain instances, this might be the result of interference between the earphones and the audio device that you are using (for example, your iPhone).

Is it possible that your headphones are broken? It’s very unlikely, so there’s no need to ship them back to Apple just yet.

There are numerous troubleshooting approaches that you may attempt before contacting Apple Support for assistance to increase the volume on your Powerbeats Pro headphones.

You shouldn’t be concerned if you are thinking, “Do Powerbeats Pro become loud?” since we will also discuss excessive volume in a moment.

Let’s go over the steps of fixing the volume problems on your Powerbeats Pro headphones.

How to deal with a device with a limited volume

Raise the volume on your iPhone or another listening device if the sound is too soft when you use your Powerbeats Pro headphones. This is the first step to take if the music is too quiet when you use your Powerbeats Pro headphones.

Because they have volume limiters built-in, Android phones tend to have volume settings that are limited at times. These volume limiters are just designed to protect your hearing.

Watch what’s happening on the screen at all times as you adjust the volume.

If you reach the maximum limit, your phone will inquire as to whether or not you would want to remove the restriction.

It is up to you to decide whether or not you want to carry out these steps.

You may be having trouble connecting or pairing your audio device with your Powerbeats Pro.

Issues with the volume on the Powerbeats Pro might be caused by pairing complications.

Unpairing these two devices should be your first step. To separate them, you need only:

1. Begin by opening the Settings app on your iOS device, whether it is an iPhone, iPad, or iPod touch.
2. Turn on the Bluetooth device.
3. To learn more about your Powerbeats Pro, choose the item in your Devices list that has an I symbol next to it.
4. Click the Forget This Device button.

You may confirm that you are removing this pairing by tapping on the Forget Device button that appears in the pop-up window.

Now, reconnect your devices by doing one of the following:

Combine with an iPhone, an iPad, or an iPod touch

1. Check to see that the Bluetooth feature on your device is turned on.
2. Put your Powerbeats Pro earphones in the case they came with, but leave the top slightly ajar.
3. Maintain a distance of no more than two inches between the Powerbeats Pro and your unlocked iOS smartphone.
4. Your iOS device ought to provide you with instructions in the form of prompts. Follow in their footsteps to complete the partnership.

Combine with a Mac, Android, or another device

1. Check to see that the Bluetooth feature on your device is turned on.
2. Put your Powerbeats Pro earphones in the case they came with, but leave the top slightly ajar.
3. Maintain pressure on the system button while you wait for the indicator light to start blinking.
4. Launch the Bluetooth menu on the device you’re using. If you are using a Mac, go to the Apple menu, choose System Preferences, and then pick Bluetooth from the list of available devices.
5. You may choose your Powerbeats Pro from the list of detected Bluetooth devices by clicking or tapping on it.

Your Powerbeats Pro battery could be on its way out.

Earbuds without wires, such as the Powerbeats Pro, have a finite amount of battery life.

The volume may start to decrease as they got closer and closer to zero percent.

Connect your Powerbeats Pro to their charging cable and wait for the battery to reach its maximum capacity.

Your problem with the volume should now be resolved if you have any success at all.

Your listening device and Powerbeats Pro may not work well together.

It may be hard to believe, but interference may create a wide variety of problems for Bluetooth devices, such as your Powerbeats Pro.

A poor Bluetooth connection might cause your volume output to be lower than typical, even though Bluetooth generally performs a very decent job of delivering music over short distances.

There is a possibility that your Beats may cease operating entirely.

You will need to make sure that you keep a tight distance between the two of them and that there is no metal (like your keys) in the middle of them.

Interference may be caused by microwaves as well as anything else whose frequency of operation is within the same wavelength.

Move further away from these potential interference spots and see if that improves the situation.

The Problem With Having Too Much Earwax

It’s okay, I know this is going to sound revolting, but after time, ear wax may accumulate on your earphones.

It’s possible that unless you take a closer look at your earphones, you won’t notice how much buildup is taking place.

If there is an excessive accumulation of earwax, it may give the impression that the sound is less clear or louder than it is.

A toothpick may be used to clean out your earphones in a gentle manner since it is small enough to go into the very tiny holes in your headphones.

After you have removed part of the ear wax with the toothpicks, use an alcohol-based wipe to coat the end of another toothpick, and then use that toothpick to swab each ear hole.

Before using your Powerbeats Pro again, give it some time for the liquid to evaporate.

Your Powerbeats Pro could have wires that are broken.

Wires have a risk of developing damage over time.

As time goes on, there’s a chance that the sound may become occasionally distorted or muffled.

You may reduce the likelihood of this problem occurring by being as careful as you can while handling your earphones, but other than that, there is not much more you can do to stop it from happening.

Unfortuitously, if you experience a broken wire or two, then it is quite likely that you will need to purchase a new pair of Powerbeats Pro headphones.

What’s wrong with my Powerbeats Pro?

To tell you the truth, the Powerbeats Pro can become rather loud, which is to be expected.

They are significantly louder than AirPods, which makes it far simpler to pick up on a lot of nuances hidden inside the music you’re listening to.

This is fantastic for those individuals who like listening to loud music.

However, you may need to dial the level down quite a bit so that you do not rupture your eardrums from the excessive noise.

Closing Thoughts

You have likely spent a significant amount of time asking, “How can I make my Beats Pro louder?” You now have several possible troubleshooting options that you may test out.

You should give these solutions a go before getting in touch with Apple for assistance so you can see how well they work for you.

If none of these solutions work, you must get in contact with Apple to discuss the next steps to take.