Why Can’t I Answer Calls on My Airpods Pro? (8 Troubleshooting Steps!)

There are various sound output options available in today’s technology market.

Apple’s Airpods, on the other hand, stand out.

Because of their unquestionable sound quality and compatibility, this is the case.

In addition, the Airpods allow us to take and receive calls wirelessly.

When utilizing your Airpods, you may run into some difficulties.

I did some investigation and discovered some of the possible causes.

Let’s get started on the article without further ado.

Why can’t I answer calls with my Airpods Pro?

Make sure your Airpods are completely charged before using them. You can also try calling someone else in your contact list to see if it helps. The problem may be also on the person’s end. Their microphone may be defective, making it difficult for you to take calls. Finally, there could be a problem with the network.

The problem becomes even weirder if your Airpods don’t work with phone calls yet operate OK with other apps.

If you run across this difficulty, there are a few debugging options you can attempt.

How Do I Use Airpods Pro To Answer Phone Calls?

It’s never been easier to make a call with Airpods Pro.

You phone Siri and say, “Hey Siri,” to begin the conversation. As a follow-up, the contact’s name is mentioned.” Call Jane mobile,” for example. This strategy, on the other hand, is optional.

You may set Siri to initiate calls or use the force sensor to begin calls.

You press the force sensor to answer or end your call.

You can do this with either of your Airpods.

You can use your voice to answer or decline a call if you use Siri.

However, this is only available to iOS 14.5 and later users.

You may wish to decline a call at times.

You might want to leave it on voicemail after that.

Double-pressing the force sensor on the Airpods Pro accomplishes this.

To answer your second call, you must put the first one on hold or hang up.

You can switch between the call on hold and the new call by tapping the phone sensor. 

You can also put a stop to the new call.

You’ll be able to switch to the other one as a result of this.

Double-pressing the force sensor accomplishes this.

What Should I Do If I’m Having Issues Answering Phone Calls?

Airpods make use of a combination of Bluetooth and hardware.

There could be a slew of reasons why your Airpods aren’t picking up calls.

There are numerous reasonable alternatives accessible.

Here are some appropriate solutions that may be useful to you:

1. Changing the Audio Output of the Call

iPhones, like all other devices, are prone to malfunction.

When you receive a call, your phone may not always route it to the Airpods.

Even though the Airpods are connected to your phone, this is the case.

If this is the case, make sure the Airpods are set as the default audio output device.

The Airpods are not connected to your phone if they are not listed among your audio devices.

You should be able to see whether your Airpods are connected or not by long-pressing the Bluetooth symbol in the icon center.

You may also check if the Airpods are connected by going to the settings.

2. Examine the Airpods’ volume.

The volume of the AirPods can sometimes make you assume the device isn’t working. The Airpods’ volume can be low or muted at times.

When on the phone, this makes it impossible to hear the other person.

If you’re using the Airpods as your primary audio device on the call screen but still can’t hear the other person, turn up the volume.

A volume indicator for the AirPods appears in the top left corner of the screen.

To boost the volume, hit the volume-up button on your screen. The problem with the phone calls should be resolved as a result of this.

3. Restarting Your iPhone’s Bluetooth

Occasionally, turning your Bluetooth on and off may help.

Before you begin, remove the Airpods from your ears and replace them in their charging case.

After that, you can try answering a phone call to check if it works.

4. How to Reset Your Airpods

One of the most effective options is to reset your Airpods.

You should disconnect your Airpods from any devices that are connected to them.

Then you should try reconnecting them from the beginning.

To do so, go to your iPhone’s Airpods Bluetooth settings and select Forget This Device.

Bring the AirPods close to your phone to reconnect.

The Airpods should be kept in their case at all times.

You should open the case and couple the devices.

5. Reset the Network Configuration

Due to network issues, you may be unable to answer a call on your Airpods at times.

Resetting your network settings may be the best solution for people who have encountered a similar issue.

It will clear off all wireless network settings as well as any Bluetooth issues.

These are the same issues that could be preventing the Airpods from working properly.

6. Double-check your Bluetooth connection

Having multiple apps using your Bluetooth at the same time could cause issues.

There may be traffic, and your Airpods will not work as intended.

There will be a limit to how much you may use the Airpods, and you may not be able to answer calls with them.

Turning off Bluetooth access to other apps can help solve this issue.

If you wish to use your phone’s Bluetooth to check the apps, go to settings and turn off Bluetooth access for all of the apps on the list.

7. Upgrade to the latest software version

Some of the issues with your Airpods could be caused by an outdated iOS version.

All of the connectivity and consumption issues could be due to this.

There may be some issues that have been fixed in recent versions that you are not aware of.

If you have any issues when using the beta releases, make a backup of your data and install a stable iOS build.

8. Use Other Apps to Research Airpods Technicalities

You can have issues with your Airpods that aren’t related to phone calls.

When using third-party applications, some difficulties may develop.

On your phone, you can use google-meet or skype for this.

Always double-check that the Airpods are selected as the output device in these apps.

With Airpods Max, how do you answer calls?

Making a call with the Airpods Max is comparable to making a call with the Airpods Pro.

You keep your hand on the digital button to answer calls.

With Siri, you may enable call announcements.

You can use your voice to answer or decline calls if you enable the functionality.

However, this feature is only available in iOS 14.5 and later.

You can also decline a call using the Airpods Max. This will be forwarded to voicemail.

You must press the digital button twice to accomplish this.

While on the first call, you can also take a second call.

You hold the button down to switch from one call to the next, and it switches.

If you want to return to your previous call, double-press the digital button.

With Airpods (2nd Generation), how do you answer calls?

Making a call using the second generation Airpods is comparable to Airpods Pro.

With a double-tap on either of your Airpods, you can summon Siri.

In the settings, you can modify this.

Double-tap either of your Airpods to answer or end any of your calls.

You can also answer or decline calls using your voice if you use Siri’s announce calls feature.

You place the first call on hold and pick up the new one to answer your second call.

To switch between your calls, double-tap on either of your Airpods.

How Do You Use Airpods (1st Generation) To Answer Calls?

You summon Siri and make your request to make a phone call with the first-generation AirPods.

You must double-tap on either of your Airpods to answer a call.

Similar to the second-generation AirPods, switching between calls is simple.

Double-tap one of your Airpods when you’re wearing it.

Final Thoughts

It’s never been easier to troubleshoot your Airpods.

This is aided by the fact that there are numerous alternatives available.

If the problems persist for an extended period, you should seek assistance from authorized engineers.

Six Times An Hour
Enable registration in settings - general