When listening to your favorite songs or the latest episode of that true-crime podcast all your friends are raving about, what is one of the most frustrating things that can occur?
What is the cause of your earbuds randomly disconnecting?
There is no doubt that no one would want to experience intermittent audio loss when wearing JLab earbuds.
The listener wishes to listen uninterrupted.
The question is, who can blame them in this noisy, chaotic, messed-up world? You expect your earbuds to operate for hours – uninterrupted – on a single charge, whether you are on the move, at home, at work, or working remotely.
I keep losing connection with my JLab earbuds. What could be the cause? [Solved!]
Your JLab earbuds may be disconnected due to a low battery level. A weak WIFI or data signal, an incompatible device, or an out-of-range Bluetooth connection could all contribute to this issue. Also, if you have paired your earbuds with an older device, it is possible that the device was requesting a connection.
Wireless Bluetooth headphones and earbuds have the following issue: If their battery is low, they will disconnect.
Initially, the problems might occur intermittently, but near the end of the battery life, they may cease to function altogether.
Although it may not always be the case, the first thing you must consider when disconnecting JLab earbuds is this.
However, if your device has been checked for battery life, and you are still wondering “Why do my Bluetooth headphones keep disconnecting?disconnecting?disconnecting?” there may be other reasons.
One problem with these earbuds is that only one side of them will disconnect at a time.
External or internal factors can interfere with the functioning of your JLab earbuds, ranging from pairing issues to faulty data or WIFI connection.
We are going to explore why they might disconnect and how to troubleshoot this extremely irritating issue.
Why do Bluetooth earbuds by JLab occasionally lose connectivity?
Connectivity issues can be attributed to a variety of causes.
The JLab earbuds may have difficulty staying connected to your device if an old device is still attempting to connect if there is interference, if you are outside of the Bluetooth range, or if the earbuds are on low battery power.
Let’s examine this issue more closely.
An Old Device Making Pairing Requests
The earbuds may be attempting to pair with the device with which you were previously paired.
It might be a good idea to reconnect your earbuds with those and instruct those devices to forget the Bluetooth connection for the earbuds.
Away from the Range
Approximately 33 feet is the range of Bluetooth technology.
Test the connection by placing a lot less distance between your host device and your earbuds.
As you listen to your earbuds, you may need to carry the phone around in your pocket.
Conflict of interest
There are many types of interference.
Several devices can interfere with the Bluetooth connection when they operate on the same frequency. One such device is the typical household microwave.
See if the connection returns after moving away from any potential interference sources.
Incompatibility of devices
It is not always easy to pair newer Bluetooth devices with older earbuds.
Check to see whether your devices are compatible with each other.
Possibly, you will need to use an older device to pair your earbuds.
Batteries are low
Your earbuds may become disconnected due to a low battery, as previously indicated.
Battery levels should be checked and recharged as necessary.
There are several versions of Bluetooth
You should ensure that both devices are running the same Bluetooth version.
If this is not done, they may experience disconnections.
The hardware and software that make up Bluetooth must work in harmony for it to operate properly.
It is recommended that your earbuds be compatible with Bluetooth 5.0 as well as your iPhone.
The pairing is optimal in this case.
Ensure that the Bluetooth version on your devices is the same.
How to troubleshoot connectivity issues
Because Bluetooth connectivity can be lost for a variety of reasons, you will need to test a variety of troubleshooting techniques before you can find a solution that works.
Naturally, it is always possible for internal hardware damages to occur, which will probably be beyond the scope of your ability to repair.
However, you should first examine these methods to determine whether they have any effect on your connectivity issue.
Avoid interfering with others
There is an easy solution to this problem.
It is not a real fix; all you are doing is relocating something that is preventing the connection from remaining intact.
The use of other electronic devices may be a contributing factor, so stepping away from them may be helpful.
Your device must be reset
The host device and/or your earbuds may need to be reset.
Resetting the computer can resolve the problem. What is the procedure for resetting JLab earbuds?” earbuds?” earbuds?” I ask.
It is a simple process. The steps are as follows:
- In the Bluetooth section of your device’s settings, you can forget your earbuds by placing them in their charging case.
- Simply tap one earbud seven times rapidly while in the charging case.
- Repeat these steps with the second earbud.
- Unplug your headphones from their charging cases.
- If the problem persists, please contact your provider.
Please ensure that your Bluetooth device is within range
Is your Bluetooth device within range? There may be a problem. Ensure that your earbuds are paired with your host device by placing them next to it.
If they are not already paired, please do so now. This will prevent the Bluetooth connection from dropping if they are too far apart.
Once you bring them within range, they should automatically reconnect.
Ensure that you have paired your device correctly
Pairing your devices correctly is essential.
Your wireless JLab earbuds need to be paired in the following manner:
- Go to the Settings section of your host device and select Bluetooth. If Bluetooth has not been activated, do so.
- For 10 seconds, hold the power button on your earbuds. Let go of the button. During the pairing process, the lights will blink red and blue.
- Locate the name of the earbud in the list of Bluetooth devices discovered. Touch the device to pair it.
Remove older devices from your network
Your earbuds may be interrupted if a previously paired device attempts to reconnect.
Frequently asked questions include: “Why does my JBL headphone keep disconnecting? As for the question, “Why do my JLab earphones constantly disconnect?”,”,disconnect?”,”,disconnect?”,”, “It really could be as simple as an outdated device getting in the way.
Battery life can be checked
You may be wondering, “How can I prevent my Bluetooth headphones from disconnecting?disconnecting?disconnecting? Please check your earbuds’ battery life.
The earbuds may be disconnected if the battery level has dropped below 10%.
Occasionally, the power will turn off at 0% before you hear “Goodbye”.
The battery should need recharging at this point.
Reconnect the earphones and forget about them
There may be bugs in the software on your earbuds or in the software on your host device (thankfully not the insect variety).
Try unplugging and replugging your JLab earbuds to see if that resolves the issue.
Power-saving and airplane modes should be turned off
Airplane and power-saving modes are known to reduce Bluetooth performance.
Try your earbuds again after turning both off.
Conclusions
It is normal for JLab earbuds to work well with Bluetooth-enabled devices such as mobile phones.
Disconnections are, of course, possible with any technology.
In most cases, the fix is straightforward.
If, however, you have tried every method of troubleshooting and remain unsatisfied, you will need to contact JLab’s consumer support for further assistance.