Technology has progressed substantially, and Bluetooth speakers are now available on the market. There are a variety of quality-focused brands available at a variety of stores all around the world. The portability of Bluetooth speakers is their primary benefit.
Unfortunately, problems do emerge from time to time, and some of them may be little or major, such as the Bluetooth connection that keeps disconnecting.
If the Bluetooth speaker fails to connect or disconnects on a regular basis, the device is most likely out of range. It’s also possible that another device is interfering with the Bluetooth connection. Ensure that the Bluetooth speaker is fully charged.
The device you want to connect to the Bluetooth speaker must likewise support Bluetooth and be within range. If none of the steps work, try resetting the Bluetooth speaker.
We’ll look at some of the reasons why your Bluetooth speaker won’t connect or keeps disconnecting in this article. We’ll look at some of the challenges that have arisen as well as the steps that you should take.
The Bluetooth Speaker Continues to Disconnect
Bluetooth technology has been around for a long time and is typically used to wirelessly transfer data between two devices.
Pairing is the term used to describe the process of connecting two Bluetooth devices. Speakers, phones, keyboards, and headphones are common examples of devices that transfer data.
The following are some of the reasons why your Bluetooth speaker keeps disconnecting:
- Another device is interfering with the connection
- Older software isn’t compatible with newer software
- The distance between the devices is too great
- The device isn’t getting enough power
- The Bluetooth speaker has a lot of gadgets connected to it.
The majority of Bluetooth-enabled goods are plainly indicated; but, if you try to pair with a computer or an older phone, you may run into problems. When connecting a new Bluetooth speaker to an old MacBook, for example, you’ll run into problems due to a software compatibility issue.
Examine the Device’s Proximity
Regardless of whether a Bluetooth speaker offers a long range of connectivity, you should initiate the pairing process close to the speaker. You can now move away after successfully connecting the two devices.
The first connection will be distorted if you travel too far.
Examine a variety of connections
If the speaker is associated with another device, the connection can easily interfere with the link in some cases. Before you begin the pairing procedure, make sure the devices are close together. You might try unpairing the devices so the Bluetooth speaker can connect to yours.
You Can Get Away From Wi-Fi Routers and Other Devices
Although newer gadgets normally correspond to newer frequencies, if the Bluetooth speaker is located close to the Wi-Fi router, you may experience some connectivity troubles. The main issue is that the router’s radio frequency interferes with Bluetooth technology.
Check the Charge of Your Devices
The majority of Bluetooth speakers incorporate a power-saving mode. When the battery charge is low, for example, the Bluetooth capability will turn off automatically. The Bluetooth device should be fully charged for a robust connection.
The Bluetooth Speaker Doesn’t Work
If the Bluetooth speaker doesn’t connect, make sure you’re close to it while starting the pairing procedure. Check that the gadget is fully charged and that no other devices are connected to the speaker. You should also make an effort to:
- Follow the pairing procedure outlined in the instructions.
- Check that both the device and the speaker have Bluetooth technology.
- Perform a speaker reset
- after clearing the Bluetooth cache.
In some cases, the problem can be readily resolved. However, if you try all of the above options and still can’t connect to the Bluetooth speaker, it’s likely that the Bluetooth chip has a serious problem and needs to be replaced. You might also invest in a new Bluetooth speaker.
Check to see if your Bluetooth is turned on.
Regardless of whether you’re connecting your PC or phone, double-check that Bluetooth is turned on.
It’s a good idea to double-check the settings. If the Bluetooth connection is not turned on, you will not be able to connect to the device; however, we thought it was important to highlight this.
- The Bluetooth settings for the iPhone can be found in the settings menu.
- The Bluetooth settings for the MacBook can be found in the top right corner.
- On an Android device, the Bluetooth settings are located in the top right corner of the screen.
- The Bluetooth settings for a Windows device can be found in the settings, and you should check the Devices section.
- The device may feature Bluetooth, depending on the TV type, which you may verify in the settings section.
Check out the manual to learn more about the pairing
procedure.
When you turn on some gadgets for the first time, they normally pair. The JBL G02, for example, comes with a specific set of instructions.
The steps for pairing with the JBL Charger 4 or JBL GO2 are as follows:
- Make sure the speaker is completely charged before using it.
- Activate the speaker.
- Hold down the Bluetooth button until the power button begins to blink.
- Make sure the Bluetooth device can be found.
There is no need to repeat these procedures after establishing that the devices have paired. Instead, it will connect automatically when you switch on the Bluetooth speaker and it is within range.
Check the Device’s Discovery Mode.
When a device is in range, some gadgets will automatically connect. If you want to link the gadget with another, you’ll have to unplug it in this situation. If your phone is linked with the JBL GO2, for example, it will reconnect immediately whenever you’re in range. If you want to pair the JBL GO2 with another device, you must first disconnect.
If you want to connect to the JBL Flip 5, you’ll need to unpair any devices that are linked to the TV.
Repeat the process of turning on and off the Bluetooth speaker.
Given that the Bluetooth speaker is powered by software and internal programmes, this is a recommendation that typically works effectively. If the speaker is left on all the time, data will overflow, and the gadget will need to be wiped clean before it can work properly again.
When storing data, the device and the speaker you want to connect usually use temporary memory. There comes a time when there is simply too much info. In this case, your device will begin to sluggish, and some apps may even cause your phone to crash.
Fortunately, such a problem is fixable. First, turn on the gadget, then wipe its memory.
Make sure the device is turned off.
Similarly, the temporary memory capacity will be used up and must be cleared. When you unpair the Bluetooth speaker, you’ll be able to correct the internal problems that prevent the device from connecting successfully.
The following guidelines should be followed:
- On an iPhone, the Bluetooth option can be found in the settings app. Choose ‘forget the device’ from the ‘information’ menu.
- The Bluetooth sign displays on the top right-hand side of the screen on a MacBook. When you click it, the ‘Bluetooth preferences’ window will display. Look for the specific Bluetooth speaker, which in this case could be the JBL Flip 2. You should click the ‘x’ to end the connection.
- Check the settings for Android and select associated devices. After that, you should double-check your connection settings. Select the individual speaker in the Bluetooth section and then select ‘unpair.’
- For Windows, go to Settings and select Devices. Go ahead and select Bluetooth from the drop-down menu.The Bluetooth speaker will then be selected, and you will click’remove device.’
- For TVs, Bluetooth devices may usually be located in the settings menu. You can locate the speakers with the remote control. After that, select ‘disconnect.’
You can rejoin after checking that the devices are no longer linked. The pairing instructions were previously published.
Check for Updates on a Regular Basis
It will be able to resolve the connectivity issues by checking for Bluetooth speaker and device updates. If the device software isn’t up to date, you’ll have trouble connecting over Bluetooth.
To avoid such problems, the speaker will need to be updated as well. If the PC or phone utilises the most recent Bluetooth firmware, the speaker may have connectivity troubles unless everything is up to current.
The major issue with the PC could be that you don’t have the necessary computer drivers to utilise while operating the speaker. When a computer connects to a certain device, the driver is the software that is typically used.
You Should Reset Your Computer
The reset clears the cache on the Bluetooth speaker, allowing the factory settings to be restored. All Bluetooth speaker-connected devices will be ‘forgotten.’ You should couple the devices again after resetting them.
Last Thoughts
If your JBL GO2 speaker won’t connect or keeps disconnecting, there’s a good chance it may be resolved with a few simple steps.
The major problem could be that the initial connection is too far away or that a device, such as a router, is blocking the signal.
Get close to the Bluetooth speaker and make sure it’s turned on. You may be required to disconnect the device and reset the speaker at times.
