“What could be causing my PS4 controller to continuously move on its own?” This is a question that has been posted by several PS4 users recently.
Everything about the game works perfectly, but why does your PlayStation 4 controller keep moving?
We will work with you to identify and address the underlying cause of this issue.
What Could Be Causing My PS4 Controller to Keep Moving Itself Around?
There is a possibility that an issue with the calibration is causing your PS4 controller to move on its own. The calibration may shift out of whack after enough time spent using your PS4 controller.
This may give the impression that the thumbsticks are moving even though you are not actively controlling their movement in any way. You can correct this by recalibrating the controller that you use with your PS4 system.
The controllers for the PlayStation 4 come equipped with built-in touchpads and motion controls as standard.
These make it possible for you to engage with the PlayStation in a variety of different ways.
Your controller’s sensor bar is what picks up your movements and reports them.
On the other hand, if your controller moves on its own, it runs the risk of malfunctioning or breaking other controls.
What Could Be Causing My PS4 Controller to Keep Moving Itself Around?
Is the controller for your PS4 moving around on its own? There could be a few factors at play here.
It is important to begin by testing the controller on a different PS4 console whenever possible.
However, if there is a problem with the hardware, it will not function.
The following are the most frequently encountered explanations for this problem:
1. A Controller That Is Soiled Or Is Damaged
There is a good chance that your PlayStation 4 controller is dirty if it keeps moving by itself but is otherwise in working order.
After extended periods of use, controllers are prone to becoming dirty, soiled, and just plain unpleasant.
Fortunately, a PS4 controller is very simple to clean.
You can clean the area around the buttons and the interior of the analog sticks with a cotton swab or a Q-tip.
If this does not resolve the issue, you can disassemble it and clean it more thoroughly.
2. Sticks That Are Broken or Loose
Problems with the controller’s analog sticks are by far the most common cause of a DualShock 4 controller on a PlayStation 4 acting erratically.
There is a problem with one of them, and it is either damaged or loose, so it is not sitting in its socket.
It’s also possible that the sticks or the area around them are being obstructed by something else. Therefore, wipe the dust off of your DualShock 4, and then make a few attempts to move the analog sticks.
3. A malfunction in the hardware
A malfunction in the hardware is another possible explanation. Changing out the physical components would resolve the problem if this is indeed the case.
Many different factors contribute to this. A malfunction in the piece of hardware is the most likely cause:
A Stick that Isn’t Working on Your Controller
If the frame is bent in any way, the analog stick may start rubbing against something, which could cause it to move on its own.
The Controller had a Loose Wire in It.
To be more specific, there is a loose wire in your console. Information is transferred from the controllers to the console via various wires.
Therefore, this issue could have been caused by a problem with one of those wires if there was something wrong with it.
USB Cable that is Defective or Damaged
There is also the possibility that the USB cable that you are using is broken or otherwise malfunctioning. Your controller might act erratically or stop responding altogether if the cable isn’t connected correctly.
Send your controller in for repairs if the analog stick is broken, if you have one! Get in touch with Sony’s customer support team or a local repair shop.
What Causes Analog Stick Drift on the PS4 and How Can I Fix It?
There is no easy or quick solution to the problem of analog stick drift; you will need to have a lot of patience and put in a lot of effort. In this guide, we will discuss potential solutions to the problem of your PS4 controller’s analog stick drifting.
Reset Your PS4 Controller
You should reset your PS4 controller to factory settings if it is giving you trouble while it is connected. To accomplish this:
- Put your console into standby mode.
- If this does not work, you will need to disconnect the DualShock 4 and then reset it.
- You’ll find the small reset button near the L2 shoulder button on the back of the controller.
- The next step is to power on your console and examines whether or not this resolves the issue.
You Should Wipe Down Your PS4 Controller.
The analog sticks on a PS4 controller tend to drift or move on their own without any input from the player.
This is a common issue that occurs with the controller, and it can be resolved by following a series of uncomplicated steps.
- Remove any debris from the area surrounding the analog stick. Use a cotton swab to remove any dirt or debris that may have accumulated around the analog stick.
- Purify the shaft of the analog stick. Rub some rubbing alcohol on the shaft of the analog stick using a cotton swab that has been dipped in the alcohol. After that, wipe it down with another piece of a dry cotton swab.
- Repeat the testing with the controller for the PS4. Repeat the motion you just did with the analog stick on your PS4 controller. If after cleaning it out you find that your PS4 controller is still drifting, it may be time to replace it.
Get Professional Help in Fixing Your PlayStation 4 Controller.
Two different approaches can be taken when repairing a PS4 controller.
The first option is to get in touch with Sony and organize a repair through the company’s official website.
The second option is to take it to a shop where it can be fixed.
Because we’ve fixed tens of thousands of PlayStation 4 controllers, you can trust that we know what we’re doing.
There is no reason for you to be concerned about anything going wrong because we will rectify the situation once it has occurred!
PS4 Controller Calibration
Did you know that even if your PlayStation 4 controller is drifting, it is still possible to calibrate it? It’s possible that completing this process won’t fix the issue completely with your PlayStation 4 controller. However, it will assist you in getting back on track.
The process of calibrating controllers for the PS4 is a straightforward one.
If you are having problems with the connection to your Bluetooth device, you can also perform this process.
How do I adjust the sensitivity on my PS4 controller?
Make sure your controller is turned on and fully charged before beginning the calibration process.
After that, you need to power on your PlayStation 4 (PS4) and attach your controller to the system using a USB cable.
After you have completed this step, select PlayStation VR from the list of devices in the Settings menu.
Select the Calibrate Controller option, and then adhere to the instructions that appear on the screen.
To get started, you will need to select the kind of controller you will be using from the drop-down menu that the app provides.
After that, you will be instructed to keep a button combination pressed down to calibrate.
The next thing you need to do is keep one of the two sticks in the middle position while pointing at one of the colored dots on the screen. You need to keep it pointed in that direction until you see the message “Please wait…” This procedure could take anywhere from three to five minutes before it is successfully finished.
How can I fix the drift on my PS4 controller’s analog stick without disassembling the controller?
In most cases, you won’t need to open up your PlayStation 4 controller or send it in for repairs to correct the problem of analog stick drift.
For instance, your controller may respond accurately, but it drifts when you stop pressing the buttons. If that is the case, there is most likely an issue with the calibration of the controller.
In this scenario, you will need to perform a factory reset on your controller to get things working properly again. To begin, press and hold the PlayStation button located on the front of the device to power down the console.
Maintain pressure on the button until the option to turn off the power appears.
After you have completed this step, you must wait at least a minute before reconnecting the power cable to the console after removing it from the wall.
In addition to that, you need to disconnect any USB cables and any other connected accessories.
After unplugging everything for at least a minute, reattach all of the cables, then turn the power back on to your console.
If your controller still works after completing this step, there should be no need for any additional steps.
On the other hand, additional steps might be necessary if the controller is still drifting in its position.
If a complete reset does not solve the problem, you can try updating the firmware on your PS4 using an external drive.
To accomplish this, go to Sony’s website and save the most recent version of the firmware you can find there.