It is intended to be a high-end earphone that will last you for a long period if properly cared for.
The fact that they are not infallible does not mean that they are infallible.
Look at what people are saying about these puppies in Apple’s discussion forums about how they charge – or, more accurately, how they do not charge (at least, not as expected).
A single earbud may not be able to be charged in some cases.
Alternatively, if it charges, it does not hold the charge as efficiently as the other earbud.
That’s odd, isn’t it? info are wondering “Why do my Powerbeats only work on one side?”,”, si de?”,”, si de?”,”, you should know that you are not alone.
There is a much greater probability of this occurring than you might initially believe.
What is the reason behind the inability to charge one of my Powerbeats Pros? It is resolved.
Several factors may contribute to improper charging of your Powerbeats Pro earbuds, from not being placed securely in the case to needing to be paired with your listening device. Simple troubleshooting methods are most often successful at home.
It might be necessary to contact Apple Support for assistance if a hardware problem is a cause.
Most of the time, the issue can be resolved by using a few straightforward troubleshooting steps.
You may be able to resolve the issue by simply adjusting the earbuds in their case.
A problem may occur if one or both of the earbuds are not securely placed inside the case.
If the Powerbeats Pro and your device are not paired, you can try cleaning them, resetting them, updating your device, or unpairing and repairing the pair.
It is not necessary to be concerned if some of those methods seem complicated.
As a final resort, you can always contact Apple Support for assistance in repairing or replacing your Powerbeats Pro headphones.
We will discuss what may be causing one of your earbuds to stop charging and how you can remedy the situation.
What is the cause of the fact that only one side of my Powerbeats works?
If one of your earbuds does not charge properly, you should verify that they are charging.
What is the most reliable way to determine whether both Powerbeats Pro are charging? The process of checking the charge status is simple. Here is how you can do so.
Access the App from Your iPhone, iPad, or iPod touch
- Ensure that you have activated and paired your Powerbeats Pro with your iPhone, iPad, or iPod touch.
- Keep the charging case open while you place the earbuds in it.
- The Powerbeats Pro should be placed at least two inches from the unlocked device.
- There will be a card that appears on your iOS device that displays the battery level of each earbud.
Utilizing Your Mac
- Click on the Bluetooth menu button that is located in the upper right-hand corner of your Mac’s screen.
- You can view the battery level for each earbud by selecting Powerbeats Pro.
Accessing Your Android Device
- For Android, you must download the Beats App.
- After installing the app, you should be able to view the battery level for your Powerbeats Pro.
An explanation of how to adjust the earphones inside the case
When Powerbeats Pro earbuds fail to charge, it is usually due to them not being securely inserted into their cases.
Charges may not take place unless the connectors are in contact.
Alternatively, you could adjust the ear hooks so they are not interfering with each other, close the lid, and check if the headphones are charging by opening up your phone.
If your charger is not working, try plugging it into your charging case.
You should hear a clicking sound when you press hard on the earbuds.
Ensure your device’s battery is fully charged before closing the lid.
Despite how gross this may sound, some individuals lick their earbuds to make sure they are securely placed against the case’s magnetic charging pins.
Let’s be honest, if it works, it works.
What You Need to Know About Cleaning Your Powerbeats Pro
By cleaning your earbuds regularly, you might be able to avoid questions, such as, “Why does my left Powerbeats Pro not work?”.” work?”.” work?”.” Unfortunately, earwax can be a significant obstacle.
As a result, the earbuds can become clogged, causing problems with volume and charging.
The earwax buildup can be gently prodded out of the holes with a tiny needle or pin.
In addition, they are not waterproof, even though they are water-resistant.
If water gets into one of the earbuds for an extended period, the earbuds may be damaged, just like soap, shampoo, conditioner, and body wash used in the shower may do the same.
Therefore, please do not shower while wearing a Powerbeats Pro.
In the event they do become wet inside, you’ll need to gently dry them out.
You can remove this moisture by placing them in a bowl of dry, unused rice for 48 hours.
Make sure the power source is functioning
Make sure that the problem is related to the device and not the charging source.
Switch to a different outlet and see if the charging process is improved.
Of course, you may need to replace or repair the charger for your device if it is defective.
Try using another Powerbeats-specific charger to determine whether that will resolve the issue.
Make sure your device is up-to-date
Usually, firmware updates are automatically installed, however, this does not always occur.
There may be a problem with how your earbuds charge if you need a firmware update for your device.
Check for firmware updates by using the Beats Updater app. Run the app to find out if any updates are required.
Install them if they exist.
The Powerbeats Pro should be restarted or reset
It may be necessary to reset the Powerbeats Pro.
To reset them, follow these steps:
- Leave the lid open after you place the earbuds inside the case.
- If the LED indicator light is flashing red and white, hold down the system button.
- Immediately let go.
Set your Powerbeats Pro to forget and re-pair
Try resetting the settings to factory defaults if this does not solve the problem.
In the event an update is unable to be completed, you can press and hold down the volume down button and power button at the same time, then release after four seconds after a flashing white light appears.
Upon doing so, you will be put in the discovery mode, and you will need to repair your Powerbeats Pro with your device.
The following steps will help you accomplish that goal:
- You should ensure that Bluetooth is enabled on your iPhone, iPad, or iPod touch.
- Activate the Powerbeats Pro on your iPhone, iPad, or iPod touch.
- Keep the case’s lid open and place your Powerbeats Pro within 2 inches of your unlocked device.
- You will be prompted to re-pair your earbuds once the prompts appear on your iOS device’s screen.
Conclusions
Is there anything I can do if my Powerbeats won’t charge?charge?charge? ” Well, now you should have a clearer understanding of the problem.
If all troubleshooting attempts fail, you may be facing a hardware problem.
If a cable is damaged, an earbud will not be able to charge as well as will not be able to produce sound.
If you suspect that something of the sort is occurring, contact Apple customer service to determine whether your device can be repaired under the AppleCare+ warranty.
